AWS.Tools.KinesisFirehose.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.KinesisFirehose</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordCmdlet"> <summary> Writes a single data record into an Amazon Kinesis Data Firehose delivery stream. To write multiple data records into a delivery stream, use <a>PutRecordBatch</a>. Applications using these operations are referred to as producers. <para> By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5 MB per second. If you use <a>PutRecord</a> and <a>PutRecordBatch</a>, the limits are an aggregate across these two operations for each delivery stream. For more information about limits and how to request an increase, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/limits.html">Amazon Kinesis Data Firehose Limits</a>. </para><para> You must specify the name of the delivery stream and the data record when using <a>PutRecord</a>. The data record consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it can be a segment from a log file, geographic location data, website clickstream data, and so on. </para><para> Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs at the destination, a common solution is to use delimiters in the data, such as a newline (<code>\n</code>) or some other character unique within the data. This allows the consumer application to parse individual data items when reading the data from the destination. </para><para> The <code>PutRecord</code> operation returns a <code>RecordId</code>, which is a unique string assigned to each record. Producer applications can use this ID for purposes such as auditability and investigation. </para><para> If the <code>PutRecord</code> operation throws a <code>ServiceUnavailableException</code>, back off and retry. If the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream. </para><para> Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery stream as it tries to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available. </para><important><para> Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the raw data, then perform base64 encoding. </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordCmdlet.Text"> <summary> This parameter is obsolete and will be removed in a future version. Use 'Record_Data' instead. Text string containing the data to send, which is base64-encoded when serialized. The maximum size of the data blob, before base64-encoding, is 1,000 KB. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordCmdlet.FilePath"> <summary> This parameter is obsolete and will be removed in a future version. Use 'Record_Data' instead. The fully qualified name to a file containing the data to be used instead of the Record_Data parameter. Text fully qualified name to a file containing the data to send, which is base64-encoded when serialized. The maximum size of the data blob, before base64-encoding, is 1,000 KB. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordCmdlet.Record_Data"> <summary> <para> <para>The data blob, which is base64-encoded when the blob is serialized. The maximum size of the data blob, before base64-encoding, is 1,000 KiB.</para> </para> <para>The cmdlet will automatically convert the supplied parameter of type string, string[], System.IO.FileInfo or System.IO.Stream to byte[] before supplying it to the service.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'RecordId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.PutRecordResponse). Specifying the name of a property of type Amazon.KinesisFirehose.Model.PutRecordResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.AddKINFDeliveryStreamTagCmdlet"> <summary> Adds or updates tags for the specified delivery stream. A tag is a key-value pair that you can define and assign to AWS resources. If you specify a tag that already exists, the tag value is replaced with the value that you specify in the request. Tags are metadata. For example, you can add friendly names and descriptions or other types of information that can help you distinguish the delivery stream. For more information about tags, see <a href="https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html">Using Cost Allocation Tags</a> in the <i>AWS Billing and Cost Management User Guide</i>. <para> Each delivery stream can have up to 50 tags. </para><para> This operation has a limit of five transactions per second per account. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.AddKINFDeliveryStreamTagCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream to which you want to add the tags.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.AddKINFDeliveryStreamTagCmdlet.Tag"> <summary> <para> <para>A set of key-value pairs to use to create the tags.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.AddKINFDeliveryStreamTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.TagDeliveryStreamResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.AddKINFDeliveryStreamTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeliveryStreamName parameter. The -PassThru parameter is deprecated, use -Select '^DeliveryStreamName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.AddKINFDeliveryStreamTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamCmdlet"> <summary> Describes the specified delivery stream and gets the status. For example, after your delivery stream is created, call <code>DescribeDeliveryStream</code> to see whether the delivery stream is <code>ACTIVE</code> and therefore ready for data to be sent to it. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamCmdlet.ExclusiveStartDestinationId"> <summary> <para> <para>The ID of the destination to start returning the destination information. Kinesis Data Firehose supports one destination per delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamCmdlet.Limit"> <summary> <para> <para>The limit on the number of destinations to return. You can have one destination per delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'DeliveryStreamDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.DescribeDeliveryStreamResponse). Specifying the name of a property of type Amazon.KinesisFirehose.Model.DescribeDeliveryStreamResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamListCmdlet"> <summary> Lists your delivery streams in alphabetical order of their names. <para> The number of delivery streams might be too large to return using a single call to <code>ListDeliveryStreams</code>. You can limit the number of delivery streams returned, using the <code>Limit</code> parameter. To determine whether there are more delivery streams to list, check the value of <code>HasMoreDeliveryStreams</code> in the output. If there are more delivery streams to list, you can request them by calling this operation again and setting the <code>ExclusiveStartDeliveryStreamName</code> parameter to the name of the last delivery stream returned in the last call. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamListCmdlet.DeliveryStreamType"> <summary> <para> <para>The delivery stream type. This can be one of the following values:</para><ul><li><para><code>DirectPut</code>: Provider applications access the delivery stream directly.</para></li><li><para><code>KinesisStreamAsSource</code>: The delivery stream uses a Kinesis data stream as a source.</para></li></ul><para>This parameter is optional. If this parameter is omitted, delivery streams of all types are returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamListCmdlet.ExclusiveStartDeliveryStreamName"> <summary> <para> <para>The list of delivery streams returned by this call to <code>ListDeliveryStreams</code> will start with the delivery stream whose name comes alphabetically immediately after the name you specify in <code>ExclusiveStartDeliveryStreamName</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamListCmdlet.Limit"> <summary> <para> <para>The maximum number of delivery streams to list. The default value is 10.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFDeliveryStreamListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.ListDeliveryStreamsResponse). Specifying the name of a property of type Amazon.KinesisFirehose.Model.ListDeliveryStreamsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.GetKINFTagsForDeliveryStreamCmdlet"> <summary> Lists the tags for the specified delivery stream. This operation has a limit of five transactions per second per account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFTagsForDeliveryStreamCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream whose tags you want to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFTagsForDeliveryStreamCmdlet.ExclusiveStartTagKey"> <summary> <para> <para>The key to use as the starting point for the list of tags. If you set this parameter, <code>ListTagsForDeliveryStream</code> gets all tags that occur after <code>ExclusiveStartTagKey</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFTagsForDeliveryStreamCmdlet.Limit"> <summary> <para> <para>The number of tags to return. If this number is less than the total number of tags associated with the delivery stream, <code>HasMoreTags</code> is set to <code>true</code> in the response. To list additional tags, set <code>ExclusiveStartTagKey</code> to the last key in the response. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFTagsForDeliveryStreamCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.ListTagsForDeliveryStreamResponse). Specifying the name of a property of type Amazon.KinesisFirehose.Model.ListTagsForDeliveryStreamResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.GetKINFTagsForDeliveryStreamCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeliveryStreamName parameter. The -PassThru parameter is deprecated, use -Select '^DeliveryStreamName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet"> <summary> Creates a Kinesis Data Firehose delivery stream. <para> By default, you can create up to 50 delivery streams per AWS Region. </para><para> This is an asynchronous operation that immediately returns. The initial status of the delivery stream is <code>CREATING</code>. After the delivery stream is created, its status is <code>ACTIVE</code> and it now accepts data. Attempts to send data to a delivery stream that is not in the <code>ACTIVE</code> state cause an exception. To check the state of a delivery stream, use <a>DescribeDeliveryStream</a>. </para><para> A Kinesis Data Firehose delivery stream can be configured to receive records directly from providers using <a>PutRecord</a> or <a>PutRecordBatch</a>, or it can be configured to use an existing Kinesis stream as its source. To specify a Kinesis data stream as input, set the <code>DeliveryStreamType</code> parameter to <code>KinesisStreamAsSource</code>, and provide the Kinesis stream Amazon Resource Name (ARN) and role ARN in the <code>KinesisStreamSourceConfiguration</code> parameter. </para><para> A delivery stream is configured with a single destination: Amazon S3, Amazon ES, Amazon Redshift, or Splunk. You must specify only one of the following destination configuration parameters: <code>ExtendedS3DestinationConfiguration</code>, <code>S3DestinationConfiguration</code>, <code>ElasticsearchDestinationConfiguration</code>, <code>RedshiftDestinationConfiguration</code>, or <code>SplunkDestinationConfiguration</code>. </para><para> When you specify <code>S3DestinationConfiguration</code>, you can also provide the following optional values: BufferingHints, <code>EncryptionConfiguration</code>, and <code>CompressionFormat</code>. By default, if no <code>BufferingHints</code> value is provided, Kinesis Data Firehose buffers data up to 5 MB or for 5 minutes, whichever condition is satisfied first. <code>BufferingHints</code> is a hint, so there are some cases where the service cannot adhere to these conditions strictly. For example, record boundaries might be such that the size is a little over or under the configured buffering size. By default, no encryption is performed. We strongly recommend that you enable encryption to ensure secure data storage in Amazon S3. </para><para> A few notes about Amazon Redshift as a destination: </para><ul><li><para> An Amazon Redshift destination requires an S3 bucket as intermediate location. Kinesis Data Firehose first delivers data to Amazon S3 and then uses <code>COPY</code> syntax to load data into an Amazon Redshift table. This is specified in the <code>RedshiftDestinationConfiguration.S3Configuration</code> parameter. </para></li><li><para> The compression formats <code>SNAPPY</code> or <code>ZIP</code> cannot be specified in <code>RedshiftDestinationConfiguration.S3Configuration</code> because the Amazon Redshift <code>COPY</code> operation that reads from the S3 bucket doesn't support these compression formats. </para></li><li><para> We strongly recommend that you use the user name and password you provide exclusively with Kinesis Data Firehose, and that the permissions for the account are restricted for Amazon Redshift <code>INSERT</code> permissions. </para></li></ul><para> Kinesis Data Firehose assumes the IAM role that is configured as part of the destination. The role should allow the Kinesis Data Firehose principal to assume the role, and the role should have permissions that allow the service to deliver the data. For more information, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/controlling-access.html#using-iam-s3">Grant Kinesis Data Firehose Access to an Amazon S3 Destination</a> in the <i>Amazon Kinesis Data Firehose Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ElasticsearchDestinationConfiguration_ClusterEndpoint"> <summary> <para> <para>The endpoint to use when communicating with the cluster. Specify either this <code>ClusterEndpoint</code> or the <code>DomainARN</code> field.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream. This name must be unique per AWS account in the same AWS Region. If the delivery streams are in different accounts or different Regions, you can have multiple delivery streams with the same name.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.DeliveryStreamType"> <summary> <para> <para>The delivery stream type. This parameter can be one of the following values:</para><ul><li><para><code>DirectPut</code>: Provider applications access the delivery stream directly.</para></li><li><para><code>KinesisStreamAsSource</code>: The delivery stream uses a Kinesis data stream as a source.</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ElasticsearchDestinationConfiguration_DomainARN"> <summary> <para> <para>The ARN of the Amazon ES domain. The IAM role must have permissions for <code>DescribeElasticsearchDomain</code>, <code>DescribeElasticsearchDomains</code>, and <code>DescribeElasticsearchDomainConfig</code> after assuming the role specified in <b>RoleARN</b>. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and AWS Service Namespaces</a>.</para><para>Specify either <code>ClusterEndpoint</code> or <code>DomainARN</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.RetryOptions_DurationInSecond"> <summary> <para> <para>After an initial failure to deliver to Amazon ES, the total amount of time during which Kinesis Data Firehose retries delivery (including the first attempt). After this time has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results in no retries.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.CloudWatchLoggingOptions_Enabled"> <summary> <para> <para>Enables or disables CloudWatch logging.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ProcessingConfiguration_Enabled"> <summary> <para> <para>Enables or disables data processing.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ExtendedS3DestinationConfiguration"> <summary> <para> <para>The destination in Amazon S3. You can specify only one destination.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ElasticsearchDestinationConfiguration_IndexName"> <summary> <para> <para>The Elasticsearch index name.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ElasticsearchDestinationConfiguration_IndexRotationPeriod"> <summary> <para> <para>The Elasticsearch index rotation period. Index rotation appends a timestamp to the <code>IndexName</code> to facilitate the expiration of old data. For more information, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html#es-index-rotation">Index Rotation for the Amazon ES Destination</a>. The default value is <code>OneDay</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.BufferingHints_IntervalInSecond"> <summary> <para> <para>Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.KinesisStreamSourceConfiguration_KinesisStreamARN"> <summary> <para> <para>The ARN of the source Kinesis data stream. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-kinesis-streams">Amazon Kinesis Data Streams ARN Format</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.CloudWatchLoggingOptions_LogGroupName"> <summary> <para> <para>The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.CloudWatchLoggingOptions_LogStreamName"> <summary> <para> <para>The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ProcessingConfiguration_Processor"> <summary> <para> <para>The data processors.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.RedshiftDestinationConfiguration"> <summary> <para> <para>The destination in Amazon Redshift. You can specify only one destination.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ElasticsearchDestinationConfiguration_RoleARN"> <summary> <para> <para>The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose for calling the Amazon ES Configuration API and for indexing documents. For more information, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/controlling-access.html#using-iam-s3">Grant Kinesis Data Firehose Access to an Amazon S3 Destination</a> and <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and AWS Service Namespaces</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.KinesisStreamSourceConfiguration_RoleARN"> <summary> <para> <para>The ARN of the role that provides access to the source Kinesis data stream. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-iam">AWS Identity and Access Management (IAM) ARN Format</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ElasticsearchDestinationConfiguration_S3BackupMode"> <summary> <para> <para>Defines how documents should be delivered to Amazon S3. When it is set to <code>FailedDocumentsOnly</code>, Kinesis Data Firehose writes any documents that could not be indexed to the configured Amazon S3 destination, with <code>elasticsearch-failed/</code> appended to the key prefix. When set to <code>AllDocuments</code>, Kinesis Data Firehose delivers all incoming records to Amazon S3, and also writes failed documents with <code>elasticsearch-failed/</code> appended to the prefix. For more information, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html#es-s3-backup">Amazon S3 Backup for the Amazon ES Destination</a>. Default value is <code>FailedDocumentsOnly</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ElasticsearchDestinationConfiguration_S3Configuration"> <summary> <para> <para>The configuration for the backup Amazon S3 location.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.BufferingHints_SizeInMBs"> <summary> <para> <para>Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5.</para><para>We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.SplunkDestinationConfiguration"> <summary> <para> <para>The destination in Splunk. You can specify only one destination.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.Tag"> <summary> <para> <para>A set of tags to assign to the delivery stream. A tag is a key-value pair that you can define and assign to AWS resources. Tags are metadata. For example, you can add friendly names and descriptions or other types of information that can help you distinguish the delivery stream. For more information about tags, see <a href="https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html">Using Cost Allocation Tags</a> in the AWS Billing and Cost Management User Guide.</para><para>You can specify up to 50 tags when creating a delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.ElasticsearchDestinationConfiguration_TypeName"> <summary> <para> <para>The Elasticsearch type name. For Elasticsearch 6.x, there can be only one type per index. If you try to specify a new type for an existing index that already has another type, Kinesis Data Firehose returns an error during run time.</para><para>For Elasticsearch 7.x, don't specify a <code>TypeName</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.S3DestinationConfiguration"> <summary> <para> <para>[Deprecated] The destination in Amazon S3. You can specify only one destination.</para> </para> <para>This parameter is deprecated.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'DeliveryStreamARN'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.CreateDeliveryStreamResponse). Specifying the name of a property of type Amazon.KinesisFirehose.Model.CreateDeliveryStreamResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.NewKINFDeliveryStreamCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamCmdlet"> <summary> Deletes a delivery stream and its data. <para> You can delete a delivery stream only if it is in <code>ACTIVE</code> or <code>DELETING</code> state, and not in the <code>CREATING</code> state. While the deletion request is in process, the delivery stream is in the <code>DELETING</code> state. </para><para> To check the state of a delivery stream, use <a>DescribeDeliveryStream</a>. </para><para> While the delivery stream is <code>DELETING</code> state, the service might continue to accept the records, but it doesn't make any guarantees with respect to delivering the data. Therefore, as a best practice, you should first stop any applications that are sending records before deleting a delivery stream. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.DeleteDeliveryStreamResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeliveryStreamName parameter. The -PassThru parameter is deprecated, use -Select '^DeliveryStreamName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamTagCmdlet"> <summary> Removes tags from the specified delivery stream. Removed tags are deleted, and you can't recover them after this operation successfully completes. <para> If you specify a tag that doesn't exist, the operation ignores it. </para><para> This operation has a limit of five transactions per second per account. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamTagCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamTagCmdlet.TagKey"> <summary> <para> <para>A list of tag keys. Each corresponding tag is removed from the delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.UntagDeliveryStreamResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeliveryStreamName parameter. The -PassThru parameter is deprecated, use -Select '^DeliveryStreamName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.RemoveKINFDeliveryStreamTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.StartKINFDeliveryStreamEncryptionCmdlet"> <summary> Enables server-side encryption (SSE) for the delivery stream. <para> This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the status of the stream to <code>ENABLING</code>, and then to <code>ENABLED</code>. You can continue to read and write data to your stream while its status is <code>ENABLING</code>, but the data is not encrypted. It can take up to 5 seconds after the encryption status changes to <code>ENABLED</code> before all records written to the delivery stream are encrypted. To find out whether a record or a batch of records was encrypted, check the response elements <a>PutRecordOutput$Encrypted</a> and <a>PutRecordBatchOutput$Encrypted</a>, respectively. </para><para> To check the encryption state of a delivery stream, use <a>DescribeDeliveryStream</a>. </para><para> You can only enable SSE for a delivery stream that uses <code>DirectPut</code> as its source. </para><para> The <code>StartDeliveryStreamEncryption</code> and <code>StopDeliveryStreamEncryption</code> operations have a combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call <code>StartDeliveryStreamEncryption</code> 13 times and <code>StopDeliveryStreamEncryption</code> 12 times for the same delivery stream in a 24-hour period. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.StartKINFDeliveryStreamEncryptionCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream for which you want to enable server-side encryption (SSE).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.StartKINFDeliveryStreamEncryptionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.StartDeliveryStreamEncryptionResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.StartKINFDeliveryStreamEncryptionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeliveryStreamName parameter. The -PassThru parameter is deprecated, use -Select '^DeliveryStreamName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.StartKINFDeliveryStreamEncryptionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.StopKINFDeliveryStreamEncryptionCmdlet"> <summary> Disables server-side encryption (SSE) for the delivery stream. <para> This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the status of the stream to <code>DISABLING</code>, and then to <code>DISABLED</code>. You can continue to read and write data to your stream while its status is <code>DISABLING</code>. It can take up to 5 seconds after the encryption status changes to <code>DISABLED</code> before all records written to the delivery stream are no longer subject to encryption. To find out whether a record or a batch of records was encrypted, check the response elements <a>PutRecordOutput$Encrypted</a> and <a>PutRecordBatchOutput$Encrypted</a>, respectively. </para><para> To check the encryption state of a delivery stream, use <a>DescribeDeliveryStream</a>. </para><para> The <code>StartDeliveryStreamEncryption</code> and <code>StopDeliveryStreamEncryption</code> operations have a combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call <code>StartDeliveryStreamEncryption</code> 13 times and <code>StopDeliveryStreamEncryption</code> 12 times for the same delivery stream in a 24-hour period. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.StopKINFDeliveryStreamEncryptionCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream for which you want to disable server-side encryption (SSE).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.StopKINFDeliveryStreamEncryptionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.StopDeliveryStreamEncryptionResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.StopKINFDeliveryStreamEncryptionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeliveryStreamName parameter. The -PassThru parameter is deprecated, use -Select '^DeliveryStreamName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.StopKINFDeliveryStreamEncryptionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet"> <summary> Updates the specified destination of the specified delivery stream. <para> Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while the configurations are updated, so data writes to the delivery stream can continue during this process. The updated configurations are usually effective within a few minutes. </para><para> Switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only update to another Amazon ES destination. </para><para> If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the destination configuration that already exists on the delivery stream. If any of the parameters are not specified in the call, the existing values are retained. For example, in the Amazon S3 destination, if <a>EncryptionConfiguration</a> is not specified, then the existing <code>EncryptionConfiguration</code> is maintained on the destination. </para><para> If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift, Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified. </para><para> Kinesis Data Firehose uses <code>CurrentDeliveryStreamVersionId</code> to avoid race conditions and conflicting merges. This is a required field, and the service updates the configuration only if the existing configuration has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be retrieved using <a>DescribeDeliveryStream</a>. Use the new version ID to set <code>CurrentDeliveryStreamVersionId</code> in the next call. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ElasticsearchDestinationUpdate_ClusterEndpoint"> <summary> <para> <para>The endpoint to use when communicating with the cluster. Specify either this <code>ClusterEndpoint</code> or the <code>DomainARN</code> field.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.CurrentDeliveryStreamVersionId"> <summary> <para> <para>Obtain this value from the <code>VersionId</code> result of <a>DeliveryStreamDescription</a>. This value is required, and helps the service perform conditional operations. For example, if there is an interleaving update and this value is null, then the update destination fails. After the update is successful, the <code>VersionId</code> value is updated. The service then performs a merge of the old configuration with the new configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.DestinationId"> <summary> <para> <para>The ID of the destination.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ElasticsearchDestinationUpdate_DomainARN"> <summary> <para> <para>The ARN of the Amazon ES domain. The IAM role must have permissions for <code>DescribeElasticsearchDomain</code>, <code>DescribeElasticsearchDomains</code>, and <code>DescribeElasticsearchDomainConfig</code> after assuming the IAM role specified in <code>RoleARN</code>. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and AWS Service Namespaces</a>.</para><para>Specify either <code>ClusterEndpoint</code> or <code>DomainARN</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.RetryOptions_DurationInSecond"> <summary> <para> <para>After an initial failure to deliver to Amazon ES, the total amount of time during which Kinesis Data Firehose retries delivery (including the first attempt). After this time has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results in no retries.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.CloudWatchLoggingOptions_Enabled"> <summary> <para> <para>Enables or disables CloudWatch logging.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ProcessingConfiguration_Enabled"> <summary> <para> <para>Enables or disables data processing.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ExtendedS3DestinationUpdate"> <summary> <para> <para>Describes an update for a destination in Amazon S3.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ElasticsearchDestinationUpdate_IndexName"> <summary> <para> <para>The Elasticsearch index name.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ElasticsearchDestinationUpdate_IndexRotationPeriod"> <summary> <para> <para>The Elasticsearch index rotation period. Index rotation appends a timestamp to <code>IndexName</code> to facilitate the expiration of old data. For more information, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html#es-index-rotation">Index Rotation for the Amazon ES Destination</a>. Default value is <code>OneDay</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.BufferingHints_IntervalInSecond"> <summary> <para> <para>Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.CloudWatchLoggingOptions_LogGroupName"> <summary> <para> <para>The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.CloudWatchLoggingOptions_LogStreamName"> <summary> <para> <para>The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ProcessingConfiguration_Processor"> <summary> <para> <para>The data processors.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.RedshiftDestinationUpdate"> <summary> <para> <para>Describes an update for a destination in Amazon Redshift.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ElasticsearchDestinationUpdate_RoleARN"> <summary> <para> <para>The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose for calling the Amazon ES Configuration API and for indexing documents. For more information, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/controlling-access.html#using-iam-s3">Grant Kinesis Data Firehose Access to an Amazon S3 Destination</a> and <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and AWS Service Namespaces</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ElasticsearchDestinationUpdate_S3Update"> <summary> <para> <para>The Amazon S3 destination.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.BufferingHints_SizeInMBs"> <summary> <para> <para>Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5.</para><para>We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.SplunkDestinationUpdate"> <summary> <para> <para>Describes an update for a destination in Splunk.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.ElasticsearchDestinationUpdate_TypeName"> <summary> <para> <para>The Elasticsearch type name. For Elasticsearch 6.x, there can be only one type per index. If you try to specify a new type for an existing index that already has another type, Kinesis Data Firehose returns an error during runtime.</para><para>If you upgrade Elasticsearch from 6.x to 7.x and don’t update your delivery stream, Kinesis Data Firehose still delivers data to Elasticsearch with the old index name and type name. If you want to update your delivery stream with a new index name, provide an empty string for <code>TypeName</code>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.S3DestinationUpdate"> <summary> <para> <para>[Deprecated] Describes an update for a destination in Amazon S3.</para> </para> <para>This parameter is deprecated.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.UpdateDestinationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.UpdateKINFDestinationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordBatchCmdlet"> <summary> Writes multiple data records into a delivery stream in a single call, which can achieve higher throughput per producer than when writing single records. To write single data records into a delivery stream, use <a>PutRecord</a>. Applications using these operations are referred to as producers. <para> By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5 MB per second. If you use <a>PutRecord</a> and <a>PutRecordBatch</a>, the limits are an aggregate across these two operations for each delivery stream. For more information about limits, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/limits.html">Amazon Kinesis Data Firehose Limits</a>. </para><para> Each <a>PutRecordBatch</a> request supports up to 500 records. Each record in the request can be as large as 1,000 KB (before 64-bit encoding), up to a limit of 4 MB for the entire request. These limits cannot be changed. </para><para> You must specify the name of the delivery stream and the data record when using <a>PutRecord</a>. The data record consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it could be a segment from a log file, geographic location data, website clickstream data, and so on. </para><para> Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs at the destination, a common solution is to use delimiters in the data, such as a newline (<code>\n</code>) or some other character unique within the data. This allows the consumer application to parse individual data items when reading the data from the destination. </para><para> The <a>PutRecordBatch</a> response includes a count of failed records, <code>FailedPutCount</code>, and an array of responses, <code>RequestResponses</code>. Even if the <a>PutRecordBatch</a> call succeeds, the value of <code>FailedPutCount</code> may be greater than 0, indicating that there are records for which the operation didn't succeed. Each entry in the <code>RequestResponses</code> array provides additional information about the processed record. It directly correlates with a record in the request array using the same ordering, from the top to the bottom. The response array always includes the same number of records as the request array. <code>RequestResponses</code> includes both successfully and unsuccessfully processed records. Kinesis Data Firehose tries to process all records in each <a>PutRecordBatch</a> request. A single record failure does not stop the processing of subsequent records. </para><para> A successfully processed record includes a <code>RecordId</code> value, which is unique for the record. An unsuccessfully processed record includes <code>ErrorCode</code> and <code>ErrorMessage</code> values. <code>ErrorCode</code> reflects the type of error, and is one of the following values: <code>ServiceUnavailableException</code> or <code>InternalFailure</code>. <code>ErrorMessage</code> provides more detailed information about the error. </para><para> If there is an internal server error or a timeout, the write might have completed or it might have failed. If <code>FailedPutCount</code> is greater than 0, retry the request, resending only those records that might have failed processing. This minimizes the possible duplicate records and also reduces the total bytes sent (and corresponding charges). We recommend that you handle any duplicates at the destination. </para><para> If <a>PutRecordBatch</a> throws <code>ServiceUnavailableException</code>, back off and retry. If the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream. </para><para> Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available. </para><important><para> Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the raw data, then perform base64 encoding. </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordBatchCmdlet.DeliveryStreamName"> <summary> <para> <para>The name of the delivery stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordBatchCmdlet.Record"> <summary> <para> <para>One or more records.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordBatchCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.KinesisFirehose.Model.PutRecordBatchResponse). Specifying the name of a property of type Amazon.KinesisFirehose.Model.PutRecordBatchResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordBatchCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Record parameter. The -PassThru parameter is deprecated, use -Select '^Record' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.KINF.WriteKINFRecordBatchCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |