AWS.Tools.Inspector.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.Inspector</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.INS.AddINSEventSubscriptionCmdlet"> <summary> Enables the process of sending Amazon Simple Notification Service (SNS) notifications about a specified event to a specified SNS topic. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSEventSubscriptionCmdlet.Event"> <summary> <para> <para>The event for which you want to receive SNS notifications.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSEventSubscriptionCmdlet.ResourceArn"> <summary> <para> <para>The ARN of the assessment template that is used during the event for which you want to receive SNS notifications.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSEventSubscriptionCmdlet.TopicArn"> <summary> <para> <para>The ARN of the SNS topic to which the SNS notifications are sent.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSEventSubscriptionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.SubscribeToEventResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSEventSubscriptionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.AddINSFindingAttributeCmdlet"> <summary> Assigns attributes (key and value pairs) to the findings that are specified by the ARNs of the findings. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSFindingAttributeCmdlet.Attribute"> <summary> <para> <para>The array of attributes that you want to assign to specified findings.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSFindingAttributeCmdlet.FindingArn"> <summary> <para> <para>The ARNs that specify the findings that you want to assign attributes to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSFindingAttributeCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'FailedItems'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.AddAttributesToFindingsResponse). Specifying the name of a property of type Amazon.Inspector.Model.AddAttributesToFindingsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSFindingAttributeCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the FindingArn parameter. The -PassThru parameter is deprecated, use -Select '^FindingArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.AddINSFindingAttributeCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSAgentPreviewCmdlet"> <summary> Previews the agents installed on the EC2 instances that are part of the specified assessment target.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAgentPreviewCmdlet.PreviewAgentsArn"> <summary> <para> <para>The ARN of the assessment target whose agents you want to preview.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAgentPreviewCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items you want in the response. The default value is 10. The maximum value is 500.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAgentPreviewCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the <b>PreviewAgents</b> action. Subsequent calls to the action fill <b>nextToken</b> in the request with the value of <b>NextToken</b> from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAgentPreviewCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AgentPreviews'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.PreviewAgentsResponse). Specifying the name of a property of type Amazon.Inspector.Model.PreviewAgentsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAgentPreviewCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the PreviewAgentsArn parameter. The -PassThru parameter is deprecated, use -Select '^PreviewAgentsArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAgentPreviewCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentReportCmdlet"> <summary> Produces an assessment report that includes detailed and comprehensive results of a specified assessment run. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentReportCmdlet.AssessmentRunArn"> <summary> <para> <para>The ARN that specifies the assessment run for which you want to generate a report.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentReportCmdlet.ReportFileFormat"> <summary> <para> <para>Specifies the file format (html or pdf) of the assessment report that you want to generate.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentReportCmdlet.ReportType"> <summary> <para> <para>Specifies the type of the assessment report that you want to generate. There are two types of assessment reports: a finding report and a full report. For more information, see <a href="https://docs.aws.amazon.com/inspector/latest/userguide/inspector_reports.html">Assessment Reports</a>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentReportCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.GetAssessmentReportResponse). Specifying the name of a property of type Amazon.Inspector.Model.GetAssessmentReportResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentReportCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentRunArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentRunArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunCmdlet"> <summary> Describes the assessment runs that are specified by the ARNs of the assessment runs. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunCmdlet.AssessmentRunArn"> <summary> <para> <para>The ARN that specifies the assessment run that you want to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DescribeAssessmentRunsResponse). Specifying the name of a property of type Amazon.Inspector.Model.DescribeAssessmentRunsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentRunArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentRunArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunAgentCmdlet"> <summary> Lists the agents of the assessment runs that are specified by the ARNs of the assessment runs.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunAgentCmdlet.Filter_AgentHealthCode"> <summary> <para> <para>The detailed health state of the agent. Values can be set to <b>IDLE</b>, <b>RUNNING</b>, <b>SHUTDOWN</b>, <b>UNHEALTHY</b>, <b>THROTTLED</b>, and <b>UNKNOWN</b>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunAgentCmdlet.Filter_AgentHealth"> <summary> <para> <para>The current health state of the agent. Values can be set to <b>HEALTHY</b> or <b>UNHEALTHY</b>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunAgentCmdlet.AssessmentRunArn"> <summary> <para> <para>The ARN that specifies the assessment run whose agents you want to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunAgentCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items that you want in the response. The default value is 10. The maximum value is 500.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunAgentCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the <b>ListAssessmentRunAgents</b> action. Subsequent calls to the action fill <b>nextToken</b> in the request with the value of <b>NextToken</b> from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunAgentCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AssessmentRunAgents'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.ListAssessmentRunAgentsResponse). Specifying the name of a property of type Amazon.Inspector.Model.ListAssessmentRunAgentsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunAgentCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentRunArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentRunArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunAgentCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet"> <summary> Lists the assessment runs that correspond to the assessment templates that are specified by the ARNs of the assessment templates.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.AssessmentTemplateArn"> <summary> <para> <para>The ARNs that specify the assessment templates whose assessment runs you want to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.CompletionTimeRange_BeginDate"> <summary> <para> <para>The minimum value of the timestamp range.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.StartTimeRange_BeginDate"> <summary> <para> <para>The minimum value of the timestamp range.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.StateChangeTimeRange_BeginDate"> <summary> <para> <para>The minimum value of the timestamp range.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.CompletionTimeRange_EndDate"> <summary> <para> <para>The maximum value of the timestamp range.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.StartTimeRange_EndDate"> <summary> <para> <para>The maximum value of the timestamp range.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.StateChangeTimeRange_EndDate"> <summary> <para> <para>The maximum value of the timestamp range.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.DurationRange_MaxSecond"> <summary> <para> <para>The maximum value of the duration range. Must be less than or equal to 604800 seconds (1 week).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.DurationRange_MinSecond"> <summary> <para> <para>The minimum value of the duration range. Must be greater than zero.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.Filter_NamePattern"> <summary> <para> <para>For a record to match a filter, an explicit value or a string containing a wildcard that is specified for this data type property must match the value of the <b>assessmentRunName</b> property of the <a>AssessmentRun</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.Filter_RulesPackageArn"> <summary> <para> <para>For a record to match a filter, the value that is specified for this data type property must be contained in the list of values of the <b>rulesPackages</b> property of the <a>AssessmentRun</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.Filter_State"> <summary> <para> <para>For a record to match a filter, one of the values specified for this data type property must be the exact match of the value of the <b>assessmentRunState</b> property of the <a>AssessmentRun</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items that you want in the response. The default value is 10. The maximum value is 500.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the <b>ListAssessmentRuns</b> action. Subsequent calls to the action fill <b>nextToken</b> in the request with the value of <b>NextToken</b> from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AssessmentRunArns'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.ListAssessmentRunsResponse). Specifying the name of a property of type Amazon.Inspector.Model.ListAssessmentRunsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTemplateArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTemplateArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentRunListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetCmdlet"> <summary> Describes the assessment targets that are specified by the ARNs of the assessment targets. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetCmdlet.AssessmentTargetArn"> <summary> <para> <para>The ARNs that specifies the assessment targets that you want to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DescribeAssessmentTargetsResponse). Specifying the name of a property of type Amazon.Inspector.Model.DescribeAssessmentTargetsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTargetArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTargetArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetListCmdlet"> <summary> Lists the ARNs of the assessment targets within this AWS account. For more information about assessment targets, see <a href="https://docs.aws.amazon.com/inspector/latest/userguide/inspector_applications.html">Amazon Inspector Assessment Targets</a>.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetListCmdlet.Filter_AssessmentTargetNamePattern"> <summary> <para> <para>For a record to match a filter, an explicit value or a string that contains a wildcard that is specified for this data type property must match the value of the <b>assessmentTargetName</b> property of the <a>AssessmentTarget</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetListCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items you want in the response. The default value is 10. The maximum value is 500.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetListCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the <b>ListAssessmentTargets</b> action. Subsequent calls to the action fill <b>nextToken</b> in the request with the value of <b>NextToken</b> from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AssessmentTargetArns'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.ListAssessmentTargetsResponse). Specifying the name of a property of type Amazon.Inspector.Model.ListAssessmentTargetsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Filter_AssessmentTargetNamePattern parameter. The -PassThru parameter is deprecated, use -Select '^Filter_AssessmentTargetNamePattern' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTargetListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateCmdlet"> <summary> Describes the assessment templates that are specified by the ARNs of the assessment templates. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateCmdlet.AssessmentTemplateArn"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DescribeAssessmentTemplatesResponse). Specifying the name of a property of type Amazon.Inspector.Model.DescribeAssessmentTemplatesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTemplateArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTemplateArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet"> <summary> Lists the assessment templates that correspond to the assessment targets that are specified by the ARNs of the assessment targets.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.AssessmentTargetArn"> <summary> <para> <para>A list of ARNs that specifies the assessment targets whose assessment templates you want to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.DurationRange_MaxSecond"> <summary> <para> <para>The maximum value of the duration range. Must be less than or equal to 604800 seconds (1 week).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.DurationRange_MinSecond"> <summary> <para> <para>The minimum value of the duration range. Must be greater than zero.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.Filter_NamePattern"> <summary> <para> <para>For a record to match a filter, an explicit value or a string that contains a wildcard that is specified for this data type property must match the value of the <b>assessmentTemplateName</b> property of the <a>AssessmentTemplate</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.Filter_RulesPackageArn"> <summary> <para> <para>For a record to match a filter, the values that are specified for this data type property must be contained in the list of values of the <b>rulesPackageArns</b> property of the <a>AssessmentTemplate</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items you want in the response. The default value is 10. The maximum value is 500.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the <b>ListAssessmentTemplates</b> action. Subsequent calls to the action fill <b>nextToken</b> in the request with the value of <b>NextToken</b> from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AssessmentTemplateArns'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.ListAssessmentTemplatesResponse). Specifying the name of a property of type Amazon.Inspector.Model.ListAssessmentTemplatesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTargetArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTargetArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSAssessmentTemplateListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSCrossAccountAccessRoleCmdlet"> <summary> Describes the IAM role that enables Amazon Inspector to access your AWS account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSCrossAccountAccessRoleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DescribeCrossAccountAccessRoleResponse). Specifying the name of a property of type Amazon.Inspector.Model.DescribeCrossAccountAccessRoleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSEventSubscriptionCmdlet"> <summary> Lists all the event subscriptions for the assessment template that is specified by the ARN of the assessment template. For more information, see <a>SubscribeToEvent</a> and <a>UnsubscribeFromEvent</a>.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSEventSubscriptionCmdlet.ResourceArn"> <summary> <para> <para>The ARN of the assessment template for which you want to list the existing event subscriptions.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSEventSubscriptionCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items you want in the response. The default value is 10. The maximum value is 500.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSEventSubscriptionCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the <b>ListEventSubscriptions</b> action. Subsequent calls to the action fill <b>nextToken</b> in the request with the value of <b>NextToken</b> from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSEventSubscriptionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Subscriptions'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.ListEventSubscriptionsResponse). Specifying the name of a property of type Amazon.Inspector.Model.ListEventSubscriptionsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSEventSubscriptionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSEventSubscriptionCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionCmdlet"> <summary> Describes the exclusions that are specified by the exclusions' ARNs. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionCmdlet.ExclusionArn"> <summary> <para> <para>The list of ARNs that specify the exclusions that you want to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionCmdlet.Locale"> <summary> <para> <para>The locale into which you want to translate the exclusion's title, description, and recommendation.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DescribeExclusionsResponse). Specifying the name of a property of type Amazon.Inspector.Model.DescribeExclusionsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ExclusionArn parameter. The -PassThru parameter is deprecated, use -Select '^ExclusionArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionListCmdlet"> <summary> List exclusions that are generated by the assessment run.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionListCmdlet.AssessmentRunArn"> <summary> <para> <para>The ARN of the assessment run that generated the exclusions that you want to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionListCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items you want in the response. The default value is 100. The maximum value is 500.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionListCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the ListExclusionsRequest action. Subsequent calls to the action fill nextToken in the request with the value of nextToken from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ExclusionArns'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.ListExclusionsResponse). Specifying the name of a property of type Amazon.Inspector.Model.ListExclusionsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentRunArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentRunArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionsPreviewCmdlet"> <summary> Retrieves the exclusions preview (a list of ExclusionPreview objects) specified by the preview token. You can obtain the preview token by running the CreateExclusionsPreview API.<br/><br/>In the AWS.Tools.Inspector module, this cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionsPreviewCmdlet.AssessmentTemplateArn"> <summary> <para> <para>The ARN that specifies the assessment template for which the exclusions preview was requested.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionsPreviewCmdlet.Locale"> <summary> <para> <para>The locale into which you want to translate the exclusion's title, description, and recommendation.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionsPreviewCmdlet.PreviewToken"> <summary> <para> <para>The unique identifier associated of the exclusions preview.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionsPreviewCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items you want in the response. The default value is 100. The maximum value is 500.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionsPreviewCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the GetExclusionsPreviewRequest action. Subsequent calls to the action fill nextToken in the request with the value of nextToken from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> In the AWS.Tools.Inspector module, this parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionsPreviewCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.GetExclusionsPreviewResponse). Specifying the name of a property of type Amazon.Inspector.Model.GetExclusionsPreviewResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionsPreviewCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTemplateArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTemplateArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSExclusionsPreviewCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSFindingCmdlet"> <summary> Describes the findings that are specified by the ARNs of the findings. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingCmdlet.FindingArn"> <summary> <para> <para>The ARN that specifies the finding that you want to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingCmdlet.Locale"> <summary> <para> <para>The locale into which you want to translate a finding description, recommendation, and the short description that identifies the finding.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DescribeFindingsResponse). Specifying the name of a property of type Amazon.Inspector.Model.DescribeFindingsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the FindingArn parameter. The -PassThru parameter is deprecated, use -Select '^FindingArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet"> <summary> Lists findings that are generated by the assessment runs that are specified by the ARNs of the assessment runs.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.Filter_AgentId"> <summary> <para> <para>For a record to match a filter, one of the values that is specified for this data type property must be the exact match of the value of the <b>agentId</b> property of the <a>Finding</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.AssessmentRunArn"> <summary> <para> <para>The ARNs of the assessment runs that generate the findings that you want to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.Filter_Attribute"> <summary> <para> <para>For a record to match a filter, the list of values that are specified for this data type property must be contained in the list of values of the <b>attributes</b> property of the <a>Finding</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.Filter_AutoScalingGroup"> <summary> <para> <para>For a record to match a filter, one of the values that is specified for this data type property must be the exact match of the value of the <b>autoScalingGroup</b> property of the <a>Finding</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.CreationTimeRange_BeginDate"> <summary> <para> <para>The minimum value of the timestamp range.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.CreationTimeRange_EndDate"> <summary> <para> <para>The maximum value of the timestamp range.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.Filter_RuleName"> <summary> <para> <para>For a record to match a filter, one of the values that is specified for this data type property must be the exact match of the value of the <b>ruleName</b> property of the <a>Finding</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.Filter_RulesPackageArn"> <summary> <para> <para>For a record to match a filter, one of the values that is specified for this data type property must be the exact match of the value of the <b>rulesPackageArn</b> property of the <a>Finding</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.Filter_Severity"> <summary> <para> <para>For a record to match a filter, one of the values that is specified for this data type property must be the exact match of the value of the <b>severity</b> property of the <a>Finding</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.Filter_UserAttribute"> <summary> <para> <para>For a record to match a filter, the value that is specified for this data type property must be contained in the list of values of the <b>userAttributes</b> property of the <a>Finding</a> data type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items you want in the response. The default value is 10. The maximum value is 500.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the <b>ListFindings</b> action. Subsequent calls to the action fill <b>nextToken</b> in the request with the value of <b>NextToken</b> from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'FindingArns'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.ListFindingsResponse). Specifying the name of a property of type Amazon.Inspector.Model.ListFindingsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentRunArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentRunArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSFindingListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSResourceGroupCmdlet"> <summary> Describes the resource groups that are specified by the ARNs of the resource groups. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSResourceGroupCmdlet.ResourceGroupArn"> <summary> <para> <para>The ARN that specifies the resource group that you want to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSResourceGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DescribeResourceGroupsResponse). Specifying the name of a property of type Amazon.Inspector.Model.DescribeResourceGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSResourceGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceGroupArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceGroupArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSResourceTagListCmdlet"> <summary> Lists all tags associated with an assessment template. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSResourceTagListCmdlet.ResourceArn"> <summary> <para> <para>The ARN that specifies the assessment template whose tags you want to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSResourceTagListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.ListTagsForResourceResponse). Specifying the name of a property of type Amazon.Inspector.Model.ListTagsForResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSResourceTagListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageCmdlet"> <summary> Describes the rules packages that are specified by the ARNs of the rules packages. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageCmdlet.Locale"> <summary> <para> <para>The locale that you want to translate a rules package description into.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageCmdlet.RulesPackageArn"> <summary> <para> <para>The ARN that specifies the rules package that you want to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DescribeRulesPackagesResponse). Specifying the name of a property of type Amazon.Inspector.Model.DescribeRulesPackagesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the RulesPackageArn parameter. The -PassThru parameter is deprecated, use -Select '^RulesPackageArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageListCmdlet"> <summary> Lists all available Amazon Inspector rules packages.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageListCmdlet.MaxResult"> <summary> <para> <para>You can use this parameter to indicate the maximum number of items you want in the response. The default value is 10. The maximum value is 500.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageListCmdlet.NextToken"> <summary> <para> <para>You can use this parameter when paginating results. Set the value of this parameter to null on your first call to the <b>ListRulesPackages</b> action. Subsequent calls to the action fill <b>nextToken</b> in the request with the value of <b>NextToken</b> from the previous response to continue listing data.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'RulesPackageArns'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.ListRulesPackagesResponse). Specifying the name of a property of type Amazon.Inspector.Model.ListRulesPackagesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSRulesPackageListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.GetINSTelemetryMetadataCmdlet"> <summary> Information about the data that is collected for the specified assessment run. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSTelemetryMetadataCmdlet.AssessmentRunArn"> <summary> <para> <para>The ARN that specifies the assessment run that has the telemetry data that you want to obtain.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSTelemetryMetadataCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TelemetryMetadata'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.GetTelemetryMetadataResponse). Specifying the name of a property of type Amazon.Inspector.Model.GetTelemetryMetadataResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.GetINSTelemetryMetadataCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentRunArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentRunArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTargetCmdlet"> <summary> Creates a new assessment target using the ARN of the resource group that is generated by <a>CreateResourceGroup</a>. If resourceGroupArn is not specified, all EC2 instances in the current AWS account and region are included in the assessment target. If the <a href="https://docs.aws.amazon.com/inspector/latest/userguide/inspector_slr.html">service-linked role</a> isn’t already registered, this action also creates and registers a service-linked role to grant Amazon Inspector access to AWS Services needed to perform security assessments. You can create up to 50 assessment targets per AWS account. You can run up to 500 concurrent agents per AWS account. For more information, see <a href="https://docs.aws.amazon.com/inspector/latest/userguide/inspector_applications.html"> Amazon Inspector Assessment Targets</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTargetCmdlet.AssessmentTargetName"> <summary> <para> <para>The user-defined name that identifies the assessment target that you want to create. The name must be unique within the AWS account.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTargetCmdlet.ResourceGroupArn"> <summary> <para> <para>The ARN that specifies the resource group that is used to create the assessment target. If resourceGroupArn is not specified, all EC2 instances in the current AWS account and region are included in the assessment target.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTargetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AssessmentTargetArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.CreateAssessmentTargetResponse). Specifying the name of a property of type Amazon.Inspector.Model.CreateAssessmentTargetResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTargetCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceGroupArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceGroupArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTargetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTemplateCmdlet"> <summary> Creates an assessment template for the assessment target that is specified by the ARN of the assessment target. If the <a href="https://docs.aws.amazon.com/inspector/latest/userguide/inspector_slr.html">service-linked role</a> isn’t already registered, this action also creates and registers a service-linked role to grant Amazon Inspector access to AWS Services needed to perform security assessments. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTemplateCmdlet.AssessmentTargetArn"> <summary> <para> <para>The ARN that specifies the assessment target for which you want to create the assessment template.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTemplateCmdlet.AssessmentTemplateName"> <summary> <para> <para>The user-defined name that identifies the assessment template that you want to create. You can create several assessment templates for an assessment target. The names of the assessment templates that correspond to a particular assessment target must be unique.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTemplateCmdlet.DurationInSecond"> <summary> <para> <para>The duration of the assessment run in seconds.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTemplateCmdlet.RulesPackageArn"> <summary> <para> <para>The ARNs that specify the rules packages that you want to attach to the assessment template.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTemplateCmdlet.UserAttributesForFinding"> <summary> <para> <para>The user-defined attributes that are assigned to every finding that is generated by the assessment run that uses this assessment template. An attribute is a key and value pair (an <a>Attribute</a> object). Within an assessment template, each key must be unique.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTemplateCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AssessmentTemplateArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.CreateAssessmentTemplateResponse). Specifying the name of a property of type Amazon.Inspector.Model.CreateAssessmentTemplateResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTemplateCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTargetArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTargetArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSAssessmentTemplateCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.NewINSExclusionsPreviewCmdlet"> <summary> Starts the generation of an exclusions preview for the specified assessment template. The exclusions preview lists the potential exclusions (ExclusionPreview) that Inspector can detect before it runs the assessment. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSExclusionsPreviewCmdlet.AssessmentTemplateArn"> <summary> <para> <para>The ARN that specifies the assessment template for which you want to create an exclusions preview.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSExclusionsPreviewCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'PreviewToken'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.CreateExclusionsPreviewResponse). Specifying the name of a property of type Amazon.Inspector.Model.CreateExclusionsPreviewResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSExclusionsPreviewCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTemplateArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTemplateArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSExclusionsPreviewCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.NewINSResourceGroupCmdlet"> <summary> Creates a resource group using the specified set of tags (key and value pairs) that are used to select the EC2 instances to be included in an Amazon Inspector assessment target. The created resource group is then used to create an Amazon Inspector assessment target. For more information, see <a>CreateAssessmentTarget</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSResourceGroupCmdlet.ResourceGroupTag"> <summary> <para> <para>A collection of keys and an array of possible values, '[{"key":"key1","values":["Value1","Value2"]},{"key":"Key2","values":["Value3"]}]'.</para><para>For example,'[{"key":"Name","values":["TestEC2Instance"]}]'.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSResourceGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ResourceGroupArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.CreateResourceGroupResponse). Specifying the name of a property of type Amazon.Inspector.Model.CreateResourceGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSResourceGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceGroupTag parameter. The -PassThru parameter is deprecated, use -Select '^ResourceGroupTag' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.NewINSResourceGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.RegisterINSCrossAccountAccessRoleCmdlet"> <summary> Registers the IAM role that grants Amazon Inspector access to AWS Services needed to perform security assessments. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RegisterINSCrossAccountAccessRoleCmdlet.RoleArn"> <summary> <para> <para>The ARN of the IAM role that grants Amazon Inspector access to AWS Services needed to perform security assessments. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RegisterINSCrossAccountAccessRoleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.RegisterCrossAccountAccessRoleResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RegisterINSCrossAccountAccessRoleCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the RoleArn parameter. The -PassThru parameter is deprecated, use -Select '^RoleArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RegisterINSCrossAccountAccessRoleCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentRunCmdlet"> <summary> Deletes the assessment run that is specified by the ARN of the assessment run. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentRunCmdlet.AssessmentRunArn"> <summary> <para> <para>The ARN that specifies the assessment run that you want to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentRunCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DeleteAssessmentRunResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentRunCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentRunArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentRunArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentRunCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTargetCmdlet"> <summary> Deletes the assessment target that is specified by the ARN of the assessment target. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTargetCmdlet.AssessmentTargetArn"> <summary> <para> <para>The ARN that specifies the assessment target that you want to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTargetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DeleteAssessmentTargetResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTargetCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTargetArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTargetArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTargetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTemplateCmdlet"> <summary> Deletes the assessment template that is specified by the ARN of the assessment template. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTemplateCmdlet.AssessmentTemplateArn"> <summary> <para> <para>The ARN that specifies the assessment template that you want to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTemplateCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.DeleteAssessmentTemplateResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTemplateCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTemplateArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTemplateArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSAssessmentTemplateCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.RemoveINSEventSubscriptionCmdlet"> <summary> Disables the process of sending Amazon Simple Notification Service (SNS) notifications about a specified event to a specified SNS topic. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSEventSubscriptionCmdlet.Event"> <summary> <para> <para>The event for which you want to stop receiving SNS notifications.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSEventSubscriptionCmdlet.ResourceArn"> <summary> <para> <para>The ARN of the assessment template that is used during the event for which you want to stop receiving SNS notifications.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSEventSubscriptionCmdlet.TopicArn"> <summary> <para> <para>The ARN of the SNS topic to which SNS notifications are sent.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSEventSubscriptionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.UnsubscribeFromEventResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSEventSubscriptionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.RemoveINSFindingAttributeCmdlet"> <summary> Removes entire attributes (key and value pairs) from the findings that are specified by the ARNs of the findings where an attribute with the specified key exists. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSFindingAttributeCmdlet.AttributeKey"> <summary> <para> <para>The array of attribute keys that you want to remove from specified findings.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSFindingAttributeCmdlet.FindingArn"> <summary> <para> <para>The ARNs that specify the findings that you want to remove attributes from.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSFindingAttributeCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'FailedItems'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.RemoveAttributesFromFindingsResponse). Specifying the name of a property of type Amazon.Inspector.Model.RemoveAttributesFromFindingsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.RemoveINSFindingAttributeCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.SetINSResourceTagCmdlet"> <summary> Sets tags (key and value pairs) to the assessment template that is specified by the ARN of the assessment template. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.SetINSResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The ARN of the assessment template that you want to set tags to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.SetINSResourceTagCmdlet.Tag"> <summary> <para> <para>A collection of key and value pairs that you want to set to the assessment template.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.SetINSResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.SetTagsForResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.SetINSResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.SetINSResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.StartINSAssessmentRunCmdlet"> <summary> Starts the assessment run specified by the ARN of the assessment template. For this API to function properly, you must not exceed the limit of running up to 500 concurrent agents per AWS account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.StartINSAssessmentRunCmdlet.AssessmentRunName"> <summary> <para> <para>You can specify the name for the assessment run. The name must be unique for the assessment template whose ARN is used to start the assessment run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.StartINSAssessmentRunCmdlet.AssessmentTemplateArn"> <summary> <para> <para>The ARN of the assessment template of the assessment run that you want to start.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.StartINSAssessmentRunCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AssessmentRunArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.StartAssessmentRunResponse). Specifying the name of a property of type Amazon.Inspector.Model.StartAssessmentRunResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.StartINSAssessmentRunCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.StopINSAssessmentRunCmdlet"> <summary> Stops the assessment run that is specified by the ARN of the assessment run. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.StopINSAssessmentRunCmdlet.AssessmentRunArn"> <summary> <para> <para>The ARN of the assessment run that you want to stop.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.StopINSAssessmentRunCmdlet.StopAction"> <summary> <para> <para>An input option that can be set to either START_EVALUATION or SKIP_EVALUATION. START_EVALUATION (the default value), stops the AWS agent from collecting data and begins the results evaluation and the findings generation process. SKIP_EVALUATION cancels the assessment run immediately, after which no findings are generated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.StopINSAssessmentRunCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.StopAssessmentRunResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.StopINSAssessmentRunCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentRunArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentRunArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.StopINSAssessmentRunCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.INS.UpdateINSAssessmentTargetCmdlet"> <summary> Updates the assessment target that is specified by the ARN of the assessment target. <para> If resourceGroupArn is not specified, all EC2 instances in the current AWS account and region are included in the assessment target. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.UpdateINSAssessmentTargetCmdlet.AssessmentTargetArn"> <summary> <para> <para>The ARN of the assessment target that you want to update.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.UpdateINSAssessmentTargetCmdlet.AssessmentTargetName"> <summary> <para> <para>The name of the assessment target that you want to update.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.UpdateINSAssessmentTargetCmdlet.ResourceGroupArn"> <summary> <para> <para>The ARN of the resource group that is used to specify the new resource group to associate with the assessment target.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.UpdateINSAssessmentTargetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Inspector.Model.UpdateAssessmentTargetResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.UpdateINSAssessmentTargetCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AssessmentTargetArn parameter. The -PassThru parameter is deprecated, use -Select '^AssessmentTargetArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.INS.UpdateINSAssessmentTargetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |