AWS.Tools.DAX.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.DAX</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.DAX.AddDAXResourceTagCmdlet"> <summary> Associates a set of tags with a DAX resource. You can call <c>TagResource</c> up to 5 times per second, per account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.AddDAXResourceTagCmdlet.ResourceName"> <summary> <para> <para>The name of the DAX resource to which tags should be added.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.AddDAXResourceTagCmdlet.Tag"> <summary> <para> <para>The tags to be assigned to the DAX resource. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.AddDAXResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.TagResourceResponse). Specifying the name of a property of type Amazon.DAX.Model.TagResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.AddDAXResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceName parameter. The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.AddDAXResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.GetDAXClusterCmdlet"> <summary> Returns information about all provisioned DAX clusters if no cluster identifier is specified, or about a specific DAX cluster if a cluster identifier is supplied. <para> If the cluster is in the CREATING state, only cluster level information will be displayed until all of the nodes are successfully provisioned. </para><para> If the cluster is in the DELETING state, only cluster level information will be displayed. </para><para> If nodes are currently being added to the DAX cluster, node endpoint information and creation time for the additional nodes will not be displayed until they are completely provisioned. When the DAX cluster state is <i>available</i>, the cluster is ready for use. </para><para> If nodes are currently being removed from the DAX cluster, no endpoint information for the removed nodes is displayed. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXClusterCmdlet.ClusterName"> <summary> <para> <para>The names of the DAX clusters being described.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXClusterCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to include in the response. If more results exist than the specified <c>MaxResults</c> value, a token is included in the response so that the remaining results can be retrieved.</para><para>The value for <c>MaxResults</c> must be between 20 and 100.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXClusterCmdlet.NextToken"> <summary> <para> <para>An optional token returned from a prior request. Use this token for pagination of results from this action. If this parameter is specified, the response includes only results beyond the token, up to the value specified by <c>MaxResults</c>.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXClusterCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Clusters'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DescribeClustersResponse). Specifying the name of a property of type Amazon.DAX.Model.DescribeClustersResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXClusterCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterName parameter. The -PassThru parameter is deprecated, use -Select '^ClusterName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXClusterCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.GetDAXDefaultParameterCmdlet"> <summary> Returns the default system parameter information for the DAX caching software.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXDefaultParameterCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to include in the response. If more results exist than the specified <c>MaxResults</c> value, a token is included in the response so that the remaining results can be retrieved.</para><para>The value for <c>MaxResults</c> must be between 20 and 100.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXDefaultParameterCmdlet.NextToken"> <summary> <para> <para>An optional token returned from a prior request. Use this token for pagination of results from this action. If this parameter is specified, the response includes only results beyond the token, up to the value specified by <c>MaxResults</c>.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXDefaultParameterCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Parameters'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DescribeDefaultParametersResponse). Specifying the name of a property of type Amazon.DAX.Model.DescribeDefaultParametersResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXDefaultParameterCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet"> <summary> Returns events related to DAX clusters and parameter groups. You can obtain events specific to a particular DAX cluster or parameter group by providing the name as a parameter. <para> By default, only the events occurring within the last 24 hours are returned; however, you can retrieve up to 14 days' worth of events if necessary. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet.Duration"> <summary> <para> <para>The number of minutes' worth of events to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet.EndTime"> <summary> <para> <para>The end of the time interval for which to retrieve events, specified in ISO 8601 format.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet.SourceName"> <summary> <para> <para>The identifier of the event source for which events will be returned. If not specified, then all sources are included in the response.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet.SourceType"> <summary> <para> <para>The event source to retrieve events for. If no value is specified, all events are returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet.StartTime"> <summary> <para> <para>The beginning of the time interval to retrieve events for, specified in ISO 8601 format.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to include in the response. If more results exist than the specified <c>MaxResults</c> value, a token is included in the response so that the remaining results can be retrieved.</para><para>The value for <c>MaxResults</c> must be between 20 and 100.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet.NextToken"> <summary> <para> <para>An optional token returned from a prior request. Use this token for pagination of results from this action. If this parameter is specified, the response includes only results beyond the token, up to the value specified by <c>MaxResults</c>.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Events'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DescribeEventsResponse). Specifying the name of a property of type Amazon.DAX.Model.DescribeEventsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXEventCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterCmdlet"> <summary> Returns the detailed parameter list for a particular parameter group.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterCmdlet.ParameterGroupName"> <summary> <para> <para>The name of the parameter group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterCmdlet.Source"> <summary> <para> <para>How the parameter is defined. For example, <c>system</c> denotes a system-defined parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to include in the response. If more results exist than the specified <c>MaxResults</c> value, a token is included in the response so that the remaining results can be retrieved.</para><para>The value for <c>MaxResults</c> must be between 20 and 100.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterCmdlet.NextToken"> <summary> <para> <para>An optional token returned from a prior request. Use this token for pagination of results from this action. If this parameter is specified, the response includes only results beyond the token, up to the value specified by <c>MaxResults</c>.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Parameters'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DescribeParametersResponse). Specifying the name of a property of type Amazon.DAX.Model.DescribeParametersResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ParameterGroupName parameter. The -PassThru parameter is deprecated, use -Select '^ParameterGroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterGroupCmdlet"> <summary> Returns a list of parameter group descriptions. If a parameter group name is specified, the list will contain only the descriptions for that group.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterGroupCmdlet.ParameterGroupName"> <summary> <para> <para>The names of the parameter groups.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterGroupCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to include in the response. If more results exist than the specified <c>MaxResults</c> value, a token is included in the response so that the remaining results can be retrieved.</para><para>The value for <c>MaxResults</c> must be between 20 and 100.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterGroupCmdlet.NextToken"> <summary> <para> <para>An optional token returned from a prior request. Use this token for pagination of results from this action. If this parameter is specified, the response includes only results beyond the token, up to the value specified by <c>MaxResults</c>.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ParameterGroups'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DescribeParameterGroupsResponse). Specifying the name of a property of type Amazon.DAX.Model.DescribeParameterGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXParameterGroupCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.GetDAXResourceTagCmdlet"> <summary> List all of the tags for a DAX cluster. You can call <c>ListTags</c> up to 10 times per second, per account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXResourceTagCmdlet.ResourceName"> <summary> <para> <para>The name of the DAX resource to which the tags belong.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXResourceTagCmdlet.NextToken"> <summary> <para> <para>An optional token returned from a prior request. Use this token for pagination of results from this action. If this parameter is specified, the response includes only results beyond the token.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.ListTagsResponse). Specifying the name of a property of type Amazon.DAX.Model.ListTagsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceName parameter. The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXResourceTagCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.GetDAXSubnetGroupCmdlet"> <summary> Returns a list of subnet group descriptions. If a subnet group name is specified, the list will contain only the description of that group.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXSubnetGroupCmdlet.SubnetGroupName"> <summary> <para> <para>The name of the subnet group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXSubnetGroupCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to include in the response. If more results exist than the specified <c>MaxResults</c> value, a token is included in the response so that the remaining results can be retrieved.</para><para>The value for <c>MaxResults</c> must be between 20 and 100.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXSubnetGroupCmdlet.NextToken"> <summary> <para> <para>An optional token returned from a prior request. Use this token for pagination of results from this action. If this parameter is specified, the response includes only results beyond the token, up to the value specified by <c>MaxResults</c>.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXSubnetGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'SubnetGroups'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DescribeSubnetGroupsResponse). Specifying the name of a property of type Amazon.DAX.Model.DescribeSubnetGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.GetDAXSubnetGroupCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet"> <summary> Creates a DAX cluster. All nodes in the cluster run the same DAX caching software. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.AvailabilityZone"> <summary> <para> <para>The Availability Zones (AZs) in which the cluster nodes will reside after the cluster has been created or updated. If provided, the length of this list must equal the <c>ReplicationFactor</c> parameter. If you omit this parameter, DAX will spread the nodes across Availability Zones for the highest availability.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.ClusterEndpointEncryptionType"> <summary> <para> <para>The type of encryption the cluster's endpoint should support. Values are:</para><ul><li><para><c>NONE</c> for no encryption</para></li><li><para><c>TLS</c> for Transport Layer Security</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.ClusterName"> <summary> <para> <para>The cluster identifier. This parameter is stored as a lowercase string.</para><para><b>Constraints:</b></para><ul><li><para>A name must contain from 1 to 20 alphanumeric characters or hyphens.</para></li><li><para>The first character must be a letter.</para></li><li><para>A name cannot end with a hyphen or contain two consecutive hyphens.</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.Description"> <summary> <para> <para>A description of the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.SSESpecification_Enabled"> <summary> <para> <para>Indicates whether server-side encryption is enabled (true) or disabled (false) on the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.IamRoleArn"> <summary> <para> <para>A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.NodeType"> <summary> <para> <para>The compute and memory capacity of the nodes in the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.NotificationTopicArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the Amazon SNS topic to which notifications will be sent.</para><note><para>The Amazon SNS topic owner must be same as the DAX cluster owner.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.ParameterGroupName"> <summary> <para> <para>The parameter group to be associated with the DAX cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.PreferredMaintenanceWindow"> <summary> <para> <para>Specifies the weekly time range during which maintenance on the DAX cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period. Valid values for <c>ddd</c> are:</para><ul><li><para><c>sun</c></para></li><li><para><c>mon</c></para></li><li><para><c>tue</c></para></li><li><para><c>wed</c></para></li><li><para><c>thu</c></para></li><li><para><c>fri</c></para></li><li><para><c>sat</c></para></li></ul><para>Example: <c>sun:05:00-sun:09:00</c></para><note><para>If you don't specify a preferred maintenance window when you create or modify a cache cluster, DAX assigns a 60-minute maintenance window on a randomly selected day of the week.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.ReplicationFactor"> <summary> <para> <para>The number of nodes in the DAX cluster. A replication factor of 1 will create a single-node cluster, without any read replicas. For additional fault tolerance, you can create a multiple node cluster with one or more read replicas. To do this, set <c>ReplicationFactor</c> to a number between 3 (one primary and two read replicas) and 10 (one primary and nine read replicas). <c>If the AvailabilityZones</c> parameter is provided, its length must equal the <c>ReplicationFactor</c>.</para><note><para>AWS recommends that you have at least two read replicas per cluster.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.SecurityGroupId"> <summary> <para> <para>A list of security group IDs to be assigned to each node in the DAX cluster. (Each of the security group ID is system-generated.)</para><para>If this parameter is not specified, DAX assigns the default VPC security group to each node.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.SubnetGroupName"> <summary> <para> <para>The name of the subnet group to be used for the replication group.</para><important><para>DAX clusters can only run in an Amazon VPC environment. All of the subnets that you specify in a subnet group must exist in the same VPC.</para></important> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.Tag"> <summary> <para> <para>A set of tags to associate with the DAX cluster. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Cluster'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.CreateClusterResponse). Specifying the name of a property of type Amazon.DAX.Model.CreateClusterResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterName parameter. The -PassThru parameter is deprecated, use -Select '^ClusterName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXClusterCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.NewDAXParameterGroupCmdlet"> <summary> Creates a new parameter group. A parameter group is a collection of parameters that you apply to all of the nodes in a DAX cluster. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXParameterGroupCmdlet.Description"> <summary> <para> <para>A description of the parameter group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXParameterGroupCmdlet.ParameterGroupName"> <summary> <para> <para>The name of the parameter group to apply to all of the clusters in this replication group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXParameterGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ParameterGroup'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.CreateParameterGroupResponse). Specifying the name of a property of type Amazon.DAX.Model.CreateParameterGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXParameterGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ParameterGroupName parameter. The -PassThru parameter is deprecated, use -Select '^ParameterGroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXParameterGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.NewDAXSubnetGroupCmdlet"> <summary> Creates a new subnet group. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXSubnetGroupCmdlet.Description"> <summary> <para> <para>A description for the subnet group</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXSubnetGroupCmdlet.SubnetGroupName"> <summary> <para> <para>A name for the subnet group. This value is stored as a lowercase string. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXSubnetGroupCmdlet.SubnetId"> <summary> <para> <para>A list of VPC subnet IDs for the subnet group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXSubnetGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'SubnetGroup'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.CreateSubnetGroupResponse). Specifying the name of a property of type Amazon.DAX.Model.CreateSubnetGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXSubnetGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SubnetGroupName parameter. The -PassThru parameter is deprecated, use -Select '^SubnetGroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.NewDAXSubnetGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXClusterCmdlet"> <summary> Deletes a previously provisioned DAX cluster. <i>DeleteCluster</i> deletes all associated nodes, node endpoints and the DAX cluster itself. When you receive a successful response from this action, DAX immediately begins deleting the cluster; you cannot cancel or revert this action. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXClusterCmdlet.ClusterName"> <summary> <para> <para>The name of the cluster to be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXClusterCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Cluster'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DeleteClusterResponse). Specifying the name of a property of type Amazon.DAX.Model.DeleteClusterResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXClusterCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterName parameter. The -PassThru parameter is deprecated, use -Select '^ClusterName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXClusterCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXParameterGroupCmdlet"> <summary> Deletes the specified parameter group. You cannot delete a parameter group if it is associated with any DAX clusters. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXParameterGroupCmdlet.ParameterGroupName"> <summary> <para> <para>The name of the parameter group to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXParameterGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'DeletionMessage'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DeleteParameterGroupResponse). Specifying the name of a property of type Amazon.DAX.Model.DeleteParameterGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXParameterGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ParameterGroupName parameter. The -PassThru parameter is deprecated, use -Select '^ParameterGroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXParameterGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXResourceTagCmdlet"> <summary> Removes the association of tags from a DAX resource. You can call <c>UntagResource</c> up to 5 times per second, per account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXResourceTagCmdlet.ResourceName"> <summary> <para> <para>The name of the DAX resource from which the tags should be removed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXResourceTagCmdlet.TagKey"> <summary> <para> <para>A list of tag keys. If the DAX cluster has any tags with these keys, then the tags are removed from the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.UntagResourceResponse). Specifying the name of a property of type Amazon.DAX.Model.UntagResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TagKey parameter. The -PassThru parameter is deprecated, use -Select '^TagKey' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXSubnetGroupCmdlet"> <summary> Deletes a subnet group. <note><para> You cannot delete a subnet group if it is associated with any DAX clusters. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXSubnetGroupCmdlet.SubnetGroupName"> <summary> <para> <para>The name of the subnet group to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXSubnetGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'DeletionMessage'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DeleteSubnetGroupResponse). Specifying the name of a property of type Amazon.DAX.Model.DeleteSubnetGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXSubnetGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SubnetGroupName parameter. The -PassThru parameter is deprecated, use -Select '^SubnetGroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RemoveDAXSubnetGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.RestartDAXNodeCmdlet"> <summary> Reboots a single node of a DAX cluster. The reboot action takes place as soon as possible. During the reboot, the node status is set to REBOOTING. <note><para><c>RebootNode</c> restarts the DAX engine process and does not remove the contents of the cache. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RestartDAXNodeCmdlet.ClusterName"> <summary> <para> <para>The name of the DAX cluster containing the node to be rebooted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RestartDAXNodeCmdlet.NodeId"> <summary> <para> <para>The system-assigned ID of the node to be rebooted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RestartDAXNodeCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Cluster'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.RebootNodeResponse). Specifying the name of a property of type Amazon.DAX.Model.RebootNodeResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RestartDAXNodeCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the NodeId parameter. The -PassThru parameter is deprecated, use -Select '^NodeId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.RestartDAXNodeCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorDecreaseCmdlet"> <summary> Removes one or more nodes from a DAX cluster. <note><para> You cannot use <c>DecreaseReplicationFactor</c> to remove the last node in a DAX cluster. If you need to do this, use <c>DeleteCluster</c> instead. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorDecreaseCmdlet.AvailabilityZone"> <summary> <para> <para>The Availability Zone(s) from which to remove nodes.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorDecreaseCmdlet.ClusterName"> <summary> <para> <para>The name of the DAX cluster from which you want to remove nodes.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorDecreaseCmdlet.NewReplicationFactor"> <summary> <para> <para>The new number of nodes for the DAX cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorDecreaseCmdlet.NodeIdsToRemove"> <summary> <para> <para>The unique identifiers of the nodes to be removed from the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorDecreaseCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Cluster'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.DecreaseReplicationFactorResponse). Specifying the name of a property of type Amazon.DAX.Model.DecreaseReplicationFactorResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorDecreaseCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterName parameter. The -PassThru parameter is deprecated, use -Select '^ClusterName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorDecreaseCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorIncreaseCmdlet"> <summary> Adds one or more nodes to a DAX cluster. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorIncreaseCmdlet.AvailabilityZone"> <summary> <para> <para>The Availability Zones (AZs) in which the cluster nodes will be created. All nodes belonging to the cluster are placed in these Availability Zones. Use this parameter if you want to distribute the nodes across multiple AZs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorIncreaseCmdlet.ClusterName"> <summary> <para> <para>The name of the DAX cluster that will receive additional nodes.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorIncreaseCmdlet.NewReplicationFactor"> <summary> <para> <para>The new number of nodes for the DAX cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorIncreaseCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Cluster'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.IncreaseReplicationFactorResponse). Specifying the name of a property of type Amazon.DAX.Model.IncreaseReplicationFactorResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorIncreaseCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterName parameter. The -PassThru parameter is deprecated, use -Select '^ClusterName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.SetDAXReplicationFactorIncreaseCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet"> <summary> Modifies the settings for a DAX cluster. You can use this action to change one or more cluster configuration parameters by specifying the parameters and the new values. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.ClusterName"> <summary> <para> <para>The name of the DAX cluster to be modified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.Description"> <summary> <para> <para>A description of the changes being made to the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.NotificationTopicArn"> <summary> <para> <para>The Amazon Resource Name (ARN) that identifies the topic.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.NotificationTopicStatus"> <summary> <para> <para>The current state of the topic. A value of “active” means that notifications will be sent to the topic. A value of “inactive” means that notifications will not be sent to the topic.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.ParameterGroupName"> <summary> <para> <para>The name of a parameter group for this cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.PreferredMaintenanceWindow"> <summary> <para> <para>A range of time when maintenance of DAX cluster software will be performed. For example: <c>sun:01:00-sun:09:00</c>. Cluster maintenance normally takes less than 30 minutes, and is performed automatically within the maintenance window.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.SecurityGroupId"> <summary> <para> <para>A list of user-specified security group IDs to be assigned to each node in the DAX cluster. If this parameter is not specified, DAX assigns the default VPC security group to each node.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Cluster'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.UpdateClusterResponse). Specifying the name of a property of type Amazon.DAX.Model.UpdateClusterResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterName parameter. The -PassThru parameter is deprecated, use -Select '^ClusterName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXClusterCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXParameterGroupCmdlet"> <summary> Modifies the parameters of a parameter group. You can modify up to 20 parameters in a single request by submitting a list parameter name and value pairs. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXParameterGroupCmdlet.ParameterGroupName"> <summary> <para> <para>The name of the parameter group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXParameterGroupCmdlet.ParameterNameValue"> <summary> <para> <para>An array of name-value pairs for the parameters in the group. Each element in the array represents a single parameter.</para><note><para><c>record-ttl-millis</c> and <c>query-ttl-millis</c> are the only supported parameter names. For more details, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DAX.cluster-management.html#DAX.cluster-management.custom-settings.ttl">Configuring TTL Settings</a>.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXParameterGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ParameterGroup'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.UpdateParameterGroupResponse). Specifying the name of a property of type Amazon.DAX.Model.UpdateParameterGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXParameterGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ParameterGroupName parameter. The -PassThru parameter is deprecated, use -Select '^ParameterGroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXParameterGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXSubnetGroupCmdlet"> <summary> Modifies an existing subnet group. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXSubnetGroupCmdlet.Description"> <summary> <para> <para>A description of the subnet group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXSubnetGroupCmdlet.SubnetGroupName"> <summary> <para> <para>The name of the subnet group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXSubnetGroupCmdlet.SubnetId"> <summary> <para> <para>A list of subnet IDs in the subnet group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXSubnetGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'SubnetGroup'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DAX.Model.UpdateSubnetGroupResponse). Specifying the name of a property of type Amazon.DAX.Model.UpdateSubnetGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXSubnetGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SubnetGroupName parameter. The -PassThru parameter is deprecated, use -Select '^SubnetGroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DAX.UpdateDAXSubnetGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |