Public/New-AGMLibLVMMount.ps1
|
# Copyright 2022 Google Inc. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. Function New-AGMLibLVMMount ([string]$appid,[string]$mountapplianceid,[string]$appname,[string]$targethostname,[string]$targethostid,[string]$imageid,[string]$imagename,[string]$label,[string]$mountmode,[string]$mountaction,[string]$prescript,[string]$postscript,[string]$volumes,[string]$volumemappings,[string]$mapdiskstoallesxhosts,[string]$mountlocation,[switch][alias("g")]$guided,[switch][alias("m")]$monitor,[switch][alias("w")]$wait) { <# .SYNOPSIS Mounts a LVM image .EXAMPLE New-AGMLibLVMMount Runs a guided menu to mount an image of a LVM to a host .EXAMPLE New-AGMLibLVMMount -appid 1425738 -targethostid 1425591 -mountaction specifymountlocation -mountapplianceid 145666187717 -mountlocation "/mnt12" Mounts the latest image for appid 1425738 on appliance 145666187717 to target host id 1425591, mounting into mount point /mnt12 .DESCRIPTION A function to mount LVM images to an existing host * Image selection can be done three ways: 1) Run this command in guided mode to learn the available images and select one 2) Learn the imagename and specify that as part of the command with -imagename 3) Learn the Appid and Cluster ID for the appliance that will mount the image and then use -appid and -mountapplianceid This will use the latest snapshot, StreamSnap or OnVault image on that appliance The mount action field is used to determine which mount action to take: -mountaction agentmanaged Will mount using the mount points selected by the agent (this is the default behaviour) -mountaction specifymountlocation Will mount using the source paths using a specified mount point that is supplied with -mountlocation -mountaction nomap Will mount without mapping the drives There are two monitoring options: -wait This will wait up to 2 minutes for the job to start, checking every 15 seconds to show you the job name -monitor Same as -wait but will also run Get-AGMLibFollowJobStatus to monitor the job to completion #> if ( (!($AGMSESSIONID)) -or (!($AGMIP)) ) { Get-AGMErrorMessage -messagetoprint "Not logged in or session expired. Please login using Connect-AGM" return } $sessiontest = Get-AGMVersion if ($sessiontest.errormessage) { $sessiontest return } # if the user gave an AppID lets check it and grab an image, need to expand outside snapshots if (($appid) -and ($mountapplianceid) -and (!($imageid))) { # if we are not running guided mode but we have an appid without imageid, then lets get the latest image on the mountappliance ID $imagegrab = Get-AGMImage -filtervalue "appid=$appid&targetuds=$mountapplianceid&jobclass=snapshot&jobclass=StreamSnap&jobclass=OnVault" -sort "consistencydate:desc,jobclasscode:asc" -limit 1 if ($imagegrab.count -eq 1) { $imageid = $imagegrab.id $imagename = $imagegrab.backupname } else { Get-AGMErrorMessage -messagetoprint "Failed to fetch a snapshot, StreamSnap or OnVault Image for appid $appid on appliance with clusterID $mountapplianceid" return } } if (($appname) -and (!($appid)) ) { $appgrab = Get-AGMApplication -filtervalue appname=$appname if ($appgrab.id.count -ne 1) { Get-AGMErrorMessage -messagetoprint "Failed to resolve $appname to a single App ID. Use Get-AGMLibApplicationID and try again specifying -appid." return } else { $appid = $appgrab.id } } # learn about the image if ($imagename) { $imagecheck = Get-AGMImage -filtervalue backupname=$imagename if (!($imagecheck)) { Get-AGMErrorMessage -messagetoprint "Failed to find $imagename using: Get-AGMImage -filtervalue backupname=$imagename" return } else { $imagegrab = Get-AGMImage -id $imagecheck.id $imageid = $imagegrab.id $appname = $imagegrab.appname $appid = $imagegrab.application.id } } # if the user gave us nothing to start work, then ask for a VMware VM name if ( (!($appname)) -and (!($imagename)) -and (!($imageid)) -and (!($appid)) ) { $guided = $true Clear-Host Write-host "LVM source selection menu" Write-host "" $appgrab = Get-AGMApplication -filtervalue "apptype=LVM Volume" | sort-object apptype,appname if ($appgrab.count -eq 0) { Get-AGMErrorMessage -messagetoprint "There are no LVM apps to list" return } else { $i = 1 foreach ($app in $appgrab) { $app | Add-Member -NotePropertyName select -NotePropertyValue $i $app | Add-Member -NotePropertyName appliancename -NotePropertyValue $app.cluster.name $app | Add-Member -NotePropertyName hostname -NotePropertyValue $app.host.name $i++ } Clear-Host write-host "Select an application" Write-host "" $appgrab | select-object select,apptype,hostname,appname,id,appliancename | Format-table * While ($true) { Write-host "" $listmax = $appgrab.id.count [int]$userselection = Read-Host "Please select an app to work with (1-$listmax)" if ($userselection -lt 1 -or $userselection -gt $listmax) { Write-Host -Object "Invalid selection. Please enter a number in range [1-$($listmax)]" } else { break } } if ($appgrab.count -eq 1) { $appname = $appgrab.appname $appid = $appgrab.id } else { $appid = $appgrab.id[($userselection - 1)] $appname = $appgrab.appname[($userselection - 1)] } } #image selection time Clear-Host $imagelist = Get-AGMImage -filtervalue "appid=$appid&jobclass=snapshot&jobclass=StreamSnap&jobclass=OnVault" | Sort-Object consistencydate,jobclasscode | select-object -Property backupname,consistencydate,id,jobclass,cluster,transport if ($imagelist.backupname.count -eq 0) { Get-AGMErrorMessage -messagetoprint "Failed to fetch any snapshot, streamsnap or onvault Images for appid $appid" return } if ($imagelist.backupname.count -eq 1) { $imagegrab = Get-AGMImage -id ($imagelist).id $imagename = $imagegrab.backupname $restorableobjects = $imagegrab.restorableobjects } else { Clear-Host Write-Host "Image list. Choose the best consistency date and jobclass." $i = 1 foreach ($image in $imagelist) { $image | Add-Member -NotePropertyName select -NotePropertyValue $i $image | Add-Member -NotePropertyName appliancename -NotePropertyValue $image.cluster.name $i++ } $imagelist | select-object select,consistencydate,jobclass,appliancename,backupname,id,transport | Format-table * While ($true) { Write-host "" $listmax = $imagelist.Length [int]$imageselection = Read-Host "Please select an image (1-$listmax)" if ($imageselection -lt 1 -or $imageselection -gt $imagelist.Length) { Write-Host -Object "Invalid selection. Please enter a number in range [1-$($imagelist.Length)]" } else { break } } $imageid = $imagelist[($imageselection - 1)].id $imagegrab = Get-AGMImage -id $imageid $imagename = $imagegrab.backupname $restorableobjects = $imagegrab.restorableobjects $mountapplianceid = $imagegrab.cluster.clusterid $mountappliancename = $imagegrab.cluster.name } } if ( ($targethostname) -and (!($targethostid)) ) { $hostcheck = Get-AGMHost -filtervalue hostname=$targethostname if ($hostcheck.id.count -ne 1) { Get-AGMErrorMessage -messagetoprint "Failed to resolve $targethostname to a single host ID. Use Get-AGMLibHostID and try again specifying -targethostid" return } else { $hostgrab = Get-AGMHost -id $hostcheck.id $targethostid = $hostgrab.id $vmtype = $hostgrab.vmtype $transport = $hostgrab.transport $diskpref = $hostgrab.diskpref $vcenterid = $hostgrab.vcenterhost.id #if the VM doesn't have a transport, then the vCenter must have one if ( ($vmtype -eq "vmware") -and (!($transport)) ) { $vcgrab = Get-AGMHost -filtervalue id=$vcenterid $transport = $vcgrab.transport } } } # if we got a target ID lets check it if ( ($targethostid) -and (!($targethostname)) ) { $hostgrab = Get-AGMHost -filtervalue id=$targethostid if ($hostgrab.id.count -eq -0) { Get-AGMErrorMessage -messagetoprint "Failed to resolve $targethostid to a single host ID. Use Get-AGMLibHostID and try again specifying -targethostid" return } $targethostname=$hostgrab.hostname $vmtype = $hostgrab.vmtype $transport = $hostgrab.transport $diskpref = $hostgrab.diskpref $vcenterid = $hostgrab.vcenterhost.id if ( ($vmtype -eq "vmware") -and (!($transport)) ) { $vcgrab = Get-AGMHost -filtervalue id=$vcenterid $transport = $vcgrab.transport } } # Guided menu for target selection and moint points and restore points and VMware options if ($guided) { if (!($label)) { Clear-Host [string]$label = Read-host "Label" } # mountedhost menu if (!($targethostid)) { $hostgrab = Get-AGMHost -filtervalue "clusterid=$mountapplianceid&hosttype!VMCluster&hosttype!esxhost&hosttype!NetApp 7 Mode&hosttype!NetApp SVM&hosttype!ProxyNASBackupHost&hosttype!Isilon" | sort-object vmtype,hostname if ($hostgrab.id.count -eq -0) { Get-AGMErrorMessage -messagetoprint "Failed to find any hosts on $mountappliancename" return } if ($hostgrab.id.count -eq 1) { $targethostid = $hostgrab.id $targethostname = $hostgrab.hostname } else { Clear-Host Write-Host "Host List." $i = 1 foreach ($hostid in $hostgrab) { $hostid | Add-Member -NotePropertyName select -NotePropertyValue $i if (!($hostid.vmtype)) { $hostid | Add-Member -NotePropertyName vmtype -NotePropertyValue "Physical" } $i++ } $hostgrab | select-object select,vmtype,hostname,ostype,id | Format-table * While ($true) { Write-host "" $listmax = $hostgrab.count [int]$userselection = Read-Host "Please select a host (1-$listmax)" if ($userselection -lt 1 -or $userselection -gt $hostgrab.Length) { Write-Host -Object "Invalid selection. Please enter a number in range [1-$($hostgrab.count)]" } else { break } } $targethostid = $hostgrab.id[($userselection - 1)] $targethostname = $hostgrab.hostname[($userselection - 1)] $vmtype = $hostgrab.vmtype[($userselection - 1)] $transport = $hostgrab.transport[($userselection - 1)] $diskpref = $hostgrab.diskpref[($userselection - 1)] $vcenterid = $hostgrab.vcenterhostid[($userselection - 1)] if ( ($vmtype -eq "vmware") -and (!($transport)) ) { $vcgrab = Get-AGMHost -filtervalue id=$vcenterid $transport = $vcgrab.transport } } } # scripts if (!($prescript)) { [string]$prescript = Read-host "Pre-script path (optional, press enter to skip)" } if (!($postscript)) { [string]$postscript = Read-host "Post-script path (optional, press enter to skip)" } # if this is a VMTarget if ($vmtype -eq "vmware") { if (($diskpref -eq "BLOCK") -and ($transport -ne "GUESTVMISCSI")) { Clear-Host Write-Host "Mount mode" if ($transport -eq "NFS") { $defaultmode = 3 Write-Host "1`: vrdm" Write-Host "2`: prdm" Write-Host "3`: nfs(default)" } else { $defaultmode = 1 Write-Host "1`: vrdm(default)" Write-Host "2`: prdm" Write-Host "3`: nfs" } Write-Host "" [int]$userselection = Read-Host "Please select from this list (1-3)" if ($userselection -eq "") { $userselection = $defaultmode } if ($userselection -eq 1) { $mountmode = "vrdm" } if ($userselection -eq 2) { $mountmode = "prdm" } if ($userselection -eq 3) { $mountmode = "nfs" } # map to all ESX host Clear-Host Write-Host "Map to all ESX Hosts" Write-Host "1`: Do not map to all ESX Hosts(default)" Write-Host "2`: Map to all ESX Hosts" Write-Host "" [int]$userselection = Read-Host "Please select from this list (1-2)" if ($userselection -eq "") { $userselection = 1 } if ($userselection -eq 1) { $mapdiskstoallesxhosts = "false" } if ($userselection -eq 2) { $mapdiskstoallesxhosts = "true" } } } # mount action write-host "" Write-Host "Mount action" Write-Host "1`: Agent managed mountpoint(default)" Write-Host "2`: Specify mount location" Write-Host "3`: Map only" Write-Host "" $userselection = "" [int]$userselection = Read-Host "Please select from this list (1-3)" if ($userselection -eq "") { $userselection = "agentmanaged" } if ($userselection -eq 1) { $mountaction = "agentmanaged" } if ($userselection -eq 2) { $mountaction = "specifymountlocation" } if ($userselection -eq 3) { $mountaction = "maponly" } if ($mountaction -eq "specifymountlocation") { if (!($mountlocation)) { $mountlocation = Read-Host "Mount location for the image (optional)" } } Clear-Host Write-Host "Guided selection is complete. The values entered would result in the following command:" Write-Host "" Write-Host -nonewline "New-AGMLibLVMMount -appid $appid -targethostid $targethostid -imageid $imageid -mountaction $mountaction" if ($uservolumelistfinal) { Write-Host -nonewline " -volumes `"$uservolumelistfinal`"" } if ($mountapplianceid) { Write-Host -nonewline " -mountapplianceid $mountapplianceid" } if ($volumemappings) { Write-Host -nonewline " -volumemappings `"$volumemappings`"" } if ($mountmode) { Write-Host -nonewline " -mountmode $mountmode -mapdiskstoallesxhosts $mapdiskstoallesxhosts" } if ($mountlocation) { Write-Host -nonewline " -mountlocation `"$mountlocation`"" } if ($prescript) { Write-Host -nonewline " -prescript `"$prescript`"" } if ($postscript) { Write-Host -nonewline " -postscript `"$postscript`"" } Write-Host "" Write-Host "1`: Run the command now (default)" Write-Host "2`: Show the JSON used to run this command, but don't run it" Write-Host "3`: Exit without running the command. If you save the command, remove the imageid to always use the most recent backup." $userchoice = Read-Host "Please select from this list (1-3)" if ($userchoice -eq 2) { $jsonprint = "yes" } if ($userchoice -eq 3) { return } } if (!($mountaction)) { $mountaction = "agentmanaged" } # if user asked for volumes if ($mountaction -eq "agentmanaged") { # now see if user wants mount points or drives per volume $vollist = $restorableobjects | select-object name | sort-object name $selectedobjects = @( foreach ($volume in $vollist.name) { [pscustomobject]@{restorableobject=$volume} } ) $selectedobjects = @() foreach ($volume in $vollist.name) { $selectedobjects = $selectedobjects + [ordered]@{ restorableobject = $volume } } } if (!($imageid)) { [string]$imageid = Read-Host "ImageID to mount" } if (!($mountmode)) { $physicalrdm = 2 $rdmmode = "nfs" } else { if ($mountmode -eq "vrdm") { $physicalrdm = 0 $rdmmode = "independentvirtual" } if ($mountmode -eq "prdm") { $physicalrdm = 1 $rdmmode = "physical" } if ($mountmode -eq "nfs") { $physicalrdm = 2 $rdmmode = "nfs" } } if ($mapdiskstoallesxhosts) { if (($mapdiskstoallesxhosts -ne "true") -and ($mapdiskstoallesxhosts -ne "false")) { Get-AGMErrorMessage -messagetoprint "The value of Map to all ESX hosts of $mapdiskstoallesxhosts is not valid. Must be true or false" return } $restoreoptions = @( @{ name = 'mapdiskstoallesxhosts' value = "$mapdiskstoallesxhosts" } ) } if ($mountaction -eq "specifymountlocation") { $restoreoptions = @( @{ name = 'mountpointperimage' value = "$mountlocation" } ) } if ($mountaction -eq "maponly") { $restoreoptions = @( @{ name = 'maponly' value = $true } ) } # handle script if ($prescript) { $script = @( [ordered]@{ phase = "PRE" ; name = $prescript } ) } if ($postscript) { $script = @( [ordered]@{ phase = "POST" ; name = $postscript } ) } if (($prescript) -and ($postscript)) { $script = @( [ordered]@{ phase = "PRE" ; name = $prescript } ; [ordered]@{ phase = "POST" ; name = $postscript }) } if (!($label)) { $label = "" } $body = [ordered]@{ label = $label; host = @{id=$targethostid} hostclusterid = $mountapplianceid; } if ($selectedobjects) { $body = $body + [ordered]@{ selectedobjects = $selectedobjects } } if ($restoreoptions) { $body = $body + [ordered]@{ restoreoptions = $restoreoptions } } if ($restoreobjectmappings) { $body = $body + [ordered]@{ restoreobjectmappings = $restoreobjectmappings } } if ($mountmode) { $body = $body + @{ physicalrdm = $physicalrdm } $body = $body + @{ rdmmode = $rdmmode } } if ($script) { $body = $body + [ordered]@{ script = $script } } $json = $body | ConvertTo-Json if ($monitor) { $wait = $true } if ($jsonprint -eq "yes") { $compressedjson = $body | ConvertTo-Json -compress Write-host "This is the final command:" Write-host "" Write-host "Post-AGMAPIData -endpoint /backup/$imageid/mount -body `'$compressedjson`'" return } Post-AGMAPIData -endpoint /backup/$imageid/mount -body $json if ($wait) { Start-Sleep -s 15 $i=1 while ($i -lt 9) { Clear-Host write-host "Checking for a running job for appid $appid against targethostname $targethostname" $jobgrab = Get-AGMJob -filtervalue "appid=$appid&jobclasscode=5&isscheduled=False&targethost=$targethostname" -sort queuedate:desc -limit 1 if (!($jobgrab.jobname)) { write-host "Job not running yet, will wait 15 seconds and check again. Check $i of 8" Start-Sleep -s 15 $jobgrab = Get-AGMJob -filtervalue "appid=$appid&jobclasscode=5&isscheduled=False&targethost=$targethostname" -sort queuedate:desc -limit 1 if (!($jobgrab.jobname)) { $i++ } } else { $i=9 $jobgrab| select-object jobname,status,progress,queuedate,startdate,targethost } } if (($jobgrab.jobname) -and ($monitor)) { Get-AGMLibFollowJobStatus $jobgrab.jobname } } } |