Public/New-AGMLibMSSQLMulti.ps1
|
# Copyright 2022 Google Inc. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. Function New-AGMLibMSSQLMulti ([string]$sourcefile,[string]$runfile,[switch]$textoutput,[switch]$runmount,[switch]$runmigration,[switch]$startmigration,[switch]$finalizemigration,[switch]$checkimagestate) { <# .SYNOPSIS Uses a pre-prepared CSV list of SQL DBs or Instances to create many new Microsoft SQLServer Databases .EXAMPLE New-AGMLibMSSQLMulti -sourcefile recoverylist.csv -runfile rundate22052022.csv -checkimagestate DBs to be recovered will be source from recoverylist.csv and mounts tracked in rundate22052022. We use -checkimagestate to check the current progress of each image. The id field is used to track the mounted image, previousimagestate shows what state the last command was attenmpting to achieve, while currentimagestate shows the current state of that image. .EXAMPLE New-AGMLibMSSQLMulti -sourcefile recoverylist.csv -runfile rundate22052022.csv -runmount This will run multiple New-AGMLibMSSQLMount jobs. If run twice, any collisions with existing mounts will not run. This means if a mount fails, if you resolve the cause of the issue you can just run the same command again with interfering with existing mounts. .EXAMPLE New-AGMLibMSSQLMulti -sourcefile recoverylist.csv -runfile rundate22052022.csv -startmigration This will start migrate jobs for any SQL Db where the migrate field is set to true. .EXAMPLE New-AGMLibMSSQLMulti -sourcefile recoverylist.csv -runfile rundate22052022.csv -runmigration This will run a migration job for each DB that has a started migration .EXAMPLE New-AGMLibMSSQLMulti -sourcefile recoverylist.csv -runfile rundate22052022.csv -finalizemigration This will finalize the migration for each DB that has a started migration .DESCRIPTION This routine needs a well formatted CSV file. This file can be created by running New-AGMLibMSSQLMount in guided mode (by starting it without specifying any options. Note the column order is not important. Here is an example of such a file: appid,appname,imagename,imageid,mountapplianceid,targethostid,targethostname,sqlinstance,recoverypoint,recoverymodel,overwrite,label,dbname,consistencygroupname,dbnamelist,dbrenamelist,dbnameprefix,dbnamesuffix,recoverdb,userlogins,username,password,base64password,mountmode,mapdiskstoallesxhosts,mountpointperimage,sltid,slpid,discovery,perfoption,migrate,copythreadcount,frequency,dontrenamedatabasefiles,volumes,files,restorelist ,WINDOWS\SQLEXPRESS,,,143112195179,,win-target,WIN-TARGET\SQLEXPRESS,,Same as source,no,sqlinst1,,avcg1,,"model,model1;CRM,crm1",,,TRUE,FALSE,,,,,,,,,,,yes,4,1,,,, If you specify both appname and appid then appid will be used. The appname is mandatory so you know the name of the source DB. In general you do not want to use the imagename or imageid column (so blank them out of even remove them) because normally we just want the latest image, rather than a specific one. For discovery to be requested, add t or true (or any text) to the discovery column. If any text appears at all (including the word false), then discovery will be requested. The following columns are used for migration: migrate,copythreadcount,frequency,dontrenamedatabasefiles,volumes,files,restorelist migrate (switch) - Left blank: no migration. Set (any character): image will be migrated copythreadcount (integer) - Left blank: 4 threads else set as number of threads frequency (integer) - Left blank: 24 hours else set a number of hours dontrenamedatabasefiles (switch): Left blank: files will be renamed to match the new database name else enter any value and files will NOT be renamed volumes (switch) - Left blank, migration expects same drive letters. Else enter true and usethe restorelist must contain the source drive letter and the target drive letter. files (switch) - Left blank: migration expects same file names. Else enter true and use the restorelist must contain the file name, the source location and the targetlocation. restorelist - files format is: filename1,source1,target1;filename2,source2,target2 volume format is: D:\,K:\;E:\,M:\ #> if ( (!($AGMSESSIONID)) -or (!($AGMIP)) ) { Get-AGMErrorMessage -messagetoprint "Not logged in or session expired. Please login using Connect-AGM" return } $sessiontest = Get-AGMVersion if ($sessiontest.errormessage) { Get-AGMErrorMessage -messagetoprint "AGM session has expired. Please login again using Connect-AGM" return } if (!($sourcefile)) { Get-AGMErrorMessage -messagetoprint "Please supply a source csv file correctly formatted as per the help for this function using: -sourcefile xxxx.csv" return; } if (!($runfile)) { Get-AGMErrorMessage -messagetoprint "Please supply a file name (the file should not exist) to store run data created by this function using: -runfile xxxx.csv" return; } if (-not (Test-Path $sourcefile )) { Get-AGMErrorMessage -messagetoprint "The sourcefile specified $sourcefile could not be found" return; } if (-not (Test-Path $runfile )) { Copy-Item $sourcefile -Destination $runfile $recoverylist = Import-Csv -Path $runfile $recoverylist | Add-Member -MemberType NoteProperty -Name previousimagestate -value "" $recoverylist | Add-Member -MemberType NoteProperty -Name mountedimageid -value "" } else { $recoverylist = Import-Csv -Path $runfile } # first we quality check the CSV if ($recoverylist.mountapplianceid -eq $null) { Get-AGMErrorMessage -messagetoprint "The following mandatory column is missing: mountapplianceid" ;return } if (($recoverylist.appname -eq $null) -and ($recoverylist.appid -eq $null)) { Get-AGMErrorMessage -messagetoprint "Could not find either appid or appname columns" ; return } write-host "" if (!($textoutput)) { $printarray = @() } # dry run for srcid and appname $row =1 foreach ($app in $recoverylist) { if ($app.mountapplianceid -eq "") { write-host "The following mandatory value is missing: mountapplianceid in row $row" ; return } $row += 1 } $row =1 foreach ($app in $recoverylist) { if ($app.appname -eq "") { write-host "The following mandatory value is missing: appname row $row" ; return} $row += 1 } if ($checkimagestate) { # first grab all the mounts $activeimagegrab = Get-AGMImage -filtervalue "jobclass=5&jobclass=15&jobclass=19&jobclass=32&jobclass=48&jobclass=59&jobclass=56&jobclass=52&characteristic=1&characteristic=2" if ($activeimagegrab.id) { $mountarray = @() # not look throught the mounts for ones that can migrate or are migrating and make an array Foreach ($id in $activeimagegrab) { $imagestate = "" $id | Add-Member -NotePropertyName appliancename -NotePropertyValue $id.cluster.name $id | Add-Member -NotePropertyName hostname -NotePropertyValue $id.host.hostname $id | Add-Member -NotePropertyName appid -NotePropertyValue $id.application.id $id | Add-Member -NotePropertyName targethostname -NotePropertyValue $id.mountedhost.hostname $id | Add-Member -NotePropertyName targethostid -NotePropertyValue $id.mountedhost.id $id | Add-Member -NotePropertyName childappname -NotePropertyValue $id.childapp.appname if ( $id.flags_text -contains "JOBFLAGS_FINALIZE_ELIGIBLE") { $imagestate = "FinalizeEligible" } elseif ( $id.flags_text -contains "JOBFLAGS_MIGRATING") { $imagestate = "MigrateStarted" } elseif ( $id.flags_text -contains "MIGRATE_ELIGIBLE") { $imagestate = "MigrateElibible" } elseif ($id.characteristic -eq "Mount") { $imagestate = "Mounted" } else { $imagestate = "Unmounted" } if ($imagestate) { $mountarray += [pscustomobject]@{ id = $id.id apptype = $id.apptype appliancename = $id.appliancename hostname = $id.hostname appname = $id.appname targethostname = $id.targethostname targethostid = $id.targethostid childappname = $id.childappname label = $id.label imagestate = $imagestate } } } } # now lok through the images we want to mount and report on them $printarray = @() foreach ($app in $recoverylist) { $childappname = "" $childapptype = "" # if we have a CG name, then look here if (($app.consistencygroupname) -and ($app.targethostname)) { $mountpeek = $mountarray | where-object {($_.childappname -eq $app.consistencygroupname) -and ($_.targethostname -eq $app.targethostname) -and ($_.label -eq $app.label)} $childappname = $app.consistencygroupname $childapptype = "ConsistencyGroup" } if (($app.consistencygroupname) -and ($app.targethostid)) { $mountpeek = $mountarray | where-object {($_.childappname -eq $app.consistencygroupname) -and ($_.targethostid -eq $app.targethostid) -and ($_.label -eq $app.label)} $childappname = $app.consistencygroupname $childapptype = "ConsistencyGroup" } # if we have a rename list, but only one DB, then look her if ($app.dbrenamelist) { if ($app.dbrenamelist.Split(";").count -eq 1) { $childappname = $app.dbrenamelist.Split(",") | Select-object -skip 1 $childapptype = "SqlServerWriter" if ($app.targethostname) { $mountpeek = $mountarray | where-object {($_.childappname -eq $childappname) -and ($_.targethostname -eq $app.targethostname) -and ($_.label -eq $app.label)} } if ($app.$targethostid) { $mountpeek = $mountarray | where-object {($_.childappname -eq $childappname) -and ($_.targethostid -eq $app.targethostid ) -and ($_.label -eq $app.label)} } } else { $childappname = $app.consistencygroupname $childapptype = "ConsistencyGroup" } } # if we have a name list with a single name if ($app.dbnamelist) { if (($app.dbnamelist.Split(",").count -eq 1) -and (!($app.dbname))) { $childappname = $app.dbnamelist $childapptype = "SqlServerWriter" if ($app.targethostname) { $mountpeek = $mountarray | where-object {($_.childappname -eq $childappname) -and ($_.targethostname -eq $app.targethostname) -and ($_.label -eq $app.label)} } if ($app.$targethostid) { $mountpeek = $mountarray | where-object {($_.childappname -eq $childappname) -and ($_.targethostid -eq $app.targethostid ) -and ($_.label -eq $app.label)} } } else { $childappname = $app.consistencygroupname $childapptype = "ConsistencyGroup" } } # if we have a single DB mount if (($app.dbname) -and ($app.targethostname)) { $mountpeek = $mountarray | where-object {($_.childappname -eq $app.dbname) -and ($_.targethostname -eq $app.targethostname) -and ($_.label -eq $app.label)} $childappname = $app.dbname $childapptype = "SqlServerWriter" } if (($app.dbname) -and ($app.$targethostid)) { $mountpeek = $mountarray | where-object {($_.childappname -eq $app.dbname) -and ($_.targethostid -eq $app.targethostid ) -and ($_.label -eq $app.label)} $childappname = $app.dbname $childapptype = "SqlServerWriter" } if ($mountpeek.id) { $app.mountedimageid = $mountpeek.id } if ($app.mountedimageid) { $mountdetails = $mountarray | where-object {$_.id -eq $app.mountedimageid} if ($mountdetails) { $printarray += [pscustomobject]@{ id = $mountdetails.id appname = $mountdetails.appname targethostname = $mountdetails.targethostname childapptype = $childapptype childappname = $mountdetails.childappname label = $mountdetails.label previousimagestate = $app.previousimagestate currentimagestate = $mountdetails.imagestate} } else { $printarray += [pscustomobject]@{ id = $app.mountedimageid appname = $app.appname targethostname = $app.targethostname childapptype = $childapptype childappname = $childappname label = $app.label previousimagestate = $app.previousimagestate currentimagestate = "ImageNotFound"} } } else { $printarray += [pscustomobject]@{ id = "" appname = $app.appname targethostname = $app.targethostname childapptype = $childapptype childappname = $childappname label = $app.label previousimagestate = $app.previousimagestate currentimagestate = "NoMountedImage" } } } $printarray $recoverylist | Export-csv -path $runfile } $printarray = @() if ($runmount) { foreach ($app in $recoverylist) { $mountcommand = 'New-AGMLibMSSQLMount -mountapplianceid ' +$app.mountapplianceid if ($app.appid) { $mountcommand = $mountcommand + ' -appid "' +$app.appid +'"' } if ($app.targethostid) { $mountcommand = $mountcommand + ' -targethostid "' +$app.targethostid +'"' } if ($app.imagename) { $mountcommand = $mountcommand + ' -imagename "' +$app.imagename +'"' } if ($app.imageid) { $mountcommand = $mountcommand + ' -imageid "' +$app.imageid +'"' } if ($app.targethostname) { $mountcommand = $mountcommand + ' -targethostname "' +$app.targethostname +'"' } if ($app.appname) { $mountcommand = $mountcommand + ' -appname "' +$app.appname +'"' } if ($app.sqlinstance) { $mountcommand = $mountcommand + ' -sqlinstance "' +$app.sqlinstance +'"' } if ($app.dbname) { $mountcommand = $mountcommand + ' -dbname "' +$app.dbname +'"' } if ($app.recoverypoint) { $mountcommand = $mountcommand + ' -recoverypoint "' +$app.recoverypoint +'"' } if ($app.recoverymodel) { $mountcommand = $mountcommand + ' -recoverymodel "' +$app.recoverymodel +'"' } if ($app.overwrite) { $mountcommand = $mountcommand + ' -overwrite "' +$app.overwrite +'"' } if ($app.label) { $mountcommand = $mountcommand + ' -label "' +$app.label +'"' } if ($app.consistencygroupname) { $mountcommand = $mountcommand + ' -consistencygroupname "' +$app.consistencygroupname +'"' } if ($app.dbnameprefix) { $mountcommand = $mountcommand + ' -dbnameprefix "' +$app.dbnameprefix +'"' } if ($app.dbrenamelist) { $mountcommand = $mountcommand + ' -dbrenamelist "' +$app.dbrenamelist +'"' } if ($app.dbnamesuffix) { $mountcommand = $mountcommand + ' -labels "' +$app.labels +'"' } if ($app.recoverdb) { $mountcommand = $mountcommand + ' -recoverdb "' +$app.recoverdb +'"' } if ($app.userlogins) { $mountcommand = $mountcommand + ' -userlogins "' +$app.userlogins +'"' } if ($app.username) { $mountcommand = $mountcommand + ' -username "' +$app.username +'"' } if ($app.password) { $mountcommand = $mountcommand + ' -password "' +$app.password +'"' } if ($app.mountmode) { $mountcommand = $mountcommand + ' -mountmode "' +$app.mountmode +'"' } if ($app.mapdiskstoallesxhosts) { $mountcommand = $mountcommand + ' -mapdiskstoallesxhosts "' +$app.mapdiskstoallesxhosts +'"' } if ($app.mountpointperimage) { $mountcommand = $mountcommand + ' -mountpointperimage "' +$app.mountpointperimage +'"' } if ($app.sltid) { $mountcommand = $mountcommand + ' -sltid "' +$app.sltid +'"' } if ($app.slpid) { $mountcommand = $mountcommand + ' -slpid "' +$app.slpid +'"' } if ($app.discovery) { $mountcommand = $mountcommand + ' -discovery ' } if ($app.perfoption) { $mountcommand = $mountcommand + ' -perfoption "' +$app.perfoption +'"' } # if there is a mountedimageid set, it is now invalid, clear it: $app.mountedimageid = "" $runcommand = Invoke-Expression $mountcommand $app.previousimagestate = "MountStarted" if ($runcommand.errormessage) { if ($textoutput) { write-host "The following command encountered this error: " $runcommand.errormessage $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "failed" message = $runcommand.errormessage.Trim() command = $mountcommand } $app.previousimagestate = "MountFailed: $($runcommand.err_message.Trim())" } } elseif ($runcommand.err_message) { if ($textoutput) { write-host "The following command encountered this error: " $runcommand.err_message $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "failed" message = $runcommand.err_message.Trim() errorcode = $runcommand.err_code command = $mountcommand } $app.previousimagestate = "MountFailed: $($runcommand.err_message.Trim())" } } else { if ($textoutput) { write-host "The following command started a job" $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "started" message = $runcommand.jobstatus command = $mountcommand } } } } if (!($textoutput)) { $printarray } $recoverylist | Export-csv -path $runfile } # start the migration! if ($startmigration) { # we need the mount array in case we dont know the mountimageID $activeimagegrab = Get-AGMImage -filtervalue "jobclass=5&jobclass=15&jobclass=19&jobclass=32&jobclass=48&jobclass=59&jobclass=56&jobclass=52&characteristic=1&characteristic=2" $mountarray = @() # not look throught the mounts for ones that can migrate or are migrating and make an array Foreach ($id in $activeimagegrab) { $imagestate = "" $id | Add-Member -NotePropertyName appliancename -NotePropertyValue $id.cluster.name $id | Add-Member -NotePropertyName hostname -NotePropertyValue $id.host.hostname $id | Add-Member -NotePropertyName appid -NotePropertyValue $id.application.id $id | Add-Member -NotePropertyName targethostname -NotePropertyValue $id.mountedhost.hostname $id | Add-Member -NotePropertyName targethostid -NotePropertyValue $id.mountedhost.id $id | Add-Member -NotePropertyName childappname -NotePropertyValue $id.childapp.appname if ( $id.flags_text -contains "JOBFLAGS_FINALIZE_ELIGIBLE") { $imagestate = "FinalizeEligible" } elseif ( $id.flags_text -contains "JOBFLAGS_MIGRATING") { $imagestate = "MigrateStarted" } elseif ( $id.flags_text -contains "MIGRATE_ELIGIBLE") { $imagestate = "MigrateElibible" } elseif ($id.characteristic -eq "Mount") { $imagestate = "Mounted" } else { $imagestate = "Unmounted" } if ($imagestate) { $mountarray += [pscustomobject]@{ id = $id.id apptype = $id.apptype appliancename = $id.appliancename hostname = $id.hostname appname = $id.appname targethostname = $id.targethostname targethostid = $id.targethostid childappname = $id.childappname label = $id.label imagestate = $imagestate } } } # migration time [string]$imagename,[string]$imageid,[int]$copythreadcount,[int]$frequency,[switch]$dontrenamedatabasefiles,[switch]$volumes,[switch]$files,[string]$restorelist foreach ($app in $recoverylist) { if ($app.migrate) { if ($app.mountedimageid -eq "") { # if we have a CG name, then look here if (($app.consistencygroupname) -and ($app.targethostname)) { $mountpeek = $mountarray | where-object {($_.childappname -eq $app.consistencygroupname) -and ($_.targethostname -eq $app.targethostname) -and ($_.label -eq $app.label)} } if (($app.consistencygroupname) -and ($app.targethostid)) { $mountpeek = $mountarray | where-object {($_.childappname -eq $app.consistencygroupname) -and ($_.targethostid -eq $app.targethostid) -and ($_.label -eq $app.label)} } # if we have a rename list, but only one DB, then look her if ($app.dbrenamelist) { if ($dbrenamelist.Split(";").count -eq 1) { $singledbname = $app.dbrenamelist.Split(",") | Select-object -skip 1 if ($app.targethostname) { $mountpeek = $mountarray | where-object {($_.childappname -eq $singledbname) -and ($_.targethostname -eq $app.targethostname) -and ($_.label -eq $app.label)} } if ($app.$targethostid) { $mountpeek = $mountarray | where-object {($_.childappname -eq $singledbname) -and ($_.targethostid -eq $app.targethostid ) -and ($_.label -eq $app.label)} } } } # if we have a name list with a single name if ($app.dbnamelist) { if (($app.dbnamelist.Split(",").count -eq 1) -and (!($app.dbname))) { $singledbname = $app.dbnamelist if ($app.targethostname) { $mountpeek = $mountarray | where-object {($_.childappname -eq $singledbname) -and ($_.targethostname -eq $app.targethostname) -and ($_.label -eq $app.label)} } if ($app.$targethostid) { $mountpeek = $mountarray | where-object {($_.childappname -eq $singledbname) -and ($_.targethostid -eq $app.targethostid ) -and ($_.label -eq $app.label)} } } } # if we have a single DB mount if (($app.dbname) -and ($app.targethostname)) { $mountpeek = $mountarray | where-object {($_.childappname -eq $app.dbname) -and ($_.targethostname -eq $app.targethostname) -and ($_.label -eq $app.label)} } if (($app.dbname) -and ($app.$targethostid)) { $mountpeek = $mountarray | where-object {($_.childappname -eq $app.dbname) -and ($_.targethostid -eq $app.targethostid ) -and ($_.label -eq $app.label)} } if ($mountpeek.id) { $app.mountedimageid = $mountpeek.id } } if ($app.mountedimageid) { $currentstate = $mountarray | where-object {($_.id -eq $app.mountedimageid)} if ($currentstate.imagestate -eq "Mounted") { $mountcommand = 'New-AGMLibMSSQLMigrate -imageid ' +$app.mountedimageid if ($app.copythreadcount) { $mountcommand = $mountcommand + ' -copythreadcount "' +$app.copythreadcount +'"' } if ($app.frequency) { $mountcommand = $mountcommand + ' -frequency "' +$app.frequency +'"' } if ($app.dontrenamedatabasefiles) { $mountcommand = $mountcommand + ' -dontrenamedatabasefiles' } if ($app.volumes) { $mountcommand = $mountcommand + ' -volumes "' +$app.volumes +'"' } if ($app.files) { $mountcommand = $mountcommand + ' -files' } if ($app.restorelist) { $mountcommand = $mountcommand + ' -restorelist "' +$app.restorelist +'"' } $runcommand = Invoke-Expression $mountcommand $app.previousimagestate = "MigrateStarted" if ($runcommand.errormessage) { if ($textoutput) { write-host "The following command encountered this error: " $runcommand.errormessage $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "failed" message = $runcommand.errormessage.Trim() command = $mountcommand } } } elseif ($runcommand.err_message) { if ($textoutput) { write-host "The following command encountered this error: " $runcommand.err_message $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "failed" message = $runcommand.err_message.Trim() errorcode = $runcommand.err_code command = $mountcommand } } } else { if ($textoutput) { write-host "The following command started a job" $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "started" message = $runcommand.jobstatus command = $mountcommand } } } } } } } $recoverylist | Export-csv -path $runfile } # run the migration! if ($runmigration) { foreach ($app in $recoverylist) { if ($app.mountedimageid) { $migrateruncommand = 'Start-AGMMigrate -imageid ' +$app.mountedimageid $runcommand = Invoke-Expression $migrateruncommand if ($runcommand.errormessage) { if ($textoutput) { write-host "The following command encountered this error: " $runcommand.errormessage $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "failed" message = $runcommand.errormessage.Trim() command = $mountcommand } } } elseif ($runcommand.err_message) { if ($textoutput) { write-host "The following command encountered this error: " $runcommand.err_message $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "failed" message = $runcommand.err_message.Trim() errorcode = $runcommand.err_code command = $mountcommand } } } else { if ($textoutput) { write-host "The following command started a job" $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "started" message = $runcommand.jobstatus command = $mountcommand } } } } } $recoverylist | Export-csv -path $runfile } if ($finalizemigration) { # we need the mount array in case we dont know the mountimageID $activeimagegrab = Get-AGMImage -filtervalue "jobclass=5&jobclass=15&jobclass=19&jobclass=32&jobclass=48&jobclass=59&jobclass=56&jobclass=52&characteristic=1&characteristic=2" $mountarray = @() # not look throught the mounts for ones that can migrate or are migrating and make an array Foreach ($id in $activeimagegrab) { $imagestate = "" $id | Add-Member -NotePropertyName appliancename -NotePropertyValue $id.cluster.name $id | Add-Member -NotePropertyName hostname -NotePropertyValue $id.host.hostname $id | Add-Member -NotePropertyName appid -NotePropertyValue $id.application.id $id | Add-Member -NotePropertyName targethostname -NotePropertyValue $id.mountedhost.hostname $id | Add-Member -NotePropertyName targethostid -NotePropertyValue $id.mountedhost.id $id | Add-Member -NotePropertyName childappname -NotePropertyValue $id.childapp.appname if ( $id.flags_text -contains "JOBFLAGS_FINALIZE_ELIGIBLE") { $imagestate = "FinalizeEligible" } elseif ( $id.flags_text -contains "JOBFLAGS_MIGRATING") { $imagestate = "MigrateStarted" } elseif ( $id.flags_text -contains "MIGRATE_ELIGIBLE") { $imagestate = "MigrateElibible" } elseif ($id.characteristic -eq "Mount") { $imagestate = "Mounted" } else { $imagestate = "Unmounted" } if ($imagestate) { $mountarray += [pscustomobject]@{ id = $id.id apptype = $id.apptype appliancename = $id.appliancename hostname = $id.hostname appname = $id.appname targethostname = $id.targethostname targethostid = $id.targethostid childappname = $id.childappname label = $id.label imagestate = $imagestate } } } foreach ($app in $recoverylist) { if ($app.mountedimageid) { $currentstate = $mountarray | where-object {($_.id -eq $app.mountedimageid)} if ($currentstate.imagestate -eq "FinalizeEligible") { $migrateruncommand = 'Start-AGMMigrate -imageid ' +$app.mountedimageid +' -finalize' $runcommand = Invoke-Expression $migrateruncommand $app.previousimagestate = "FinalizeStarted" if ($runcommand.errormessage) { if ($textoutput) { write-host "The following command encountered this error: " $runcommand.errormessage $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "failed" message = $runcommand.errormessage.Trim() command = $mountcommand } } } elseif ($runcommand.err_message) { if ($textoutput) { write-host "The following command encountered this error: " $runcommand.err_message $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "failed" message = $runcommand.err_message.Trim() errorcode = $runcommand.err_code command = $mountcommand } } } else { if ($textoutput) { write-host "The following command started a job" $mountcommand write-host "" } else { $printarray += [pscustomobject]@{ appname = $app.appname appid = $app.appid result = "started" message = $runcommand.jobstatus command = $mountcommand } } } } } } $recoverylist | Export-csv -path $runfile } } |