Public/New-AGMLibFSMount.ps1
|
Function New-AGMLibFSMount ([string]$appid,[string]$mountapplianceid,[string]$appname,[string]$targethostname,[string]$targethostid,[string]$imageid,[string]$imagename,[string]$label,[string]$mountmode,[string]$volumes,[string]$volumemappings,[string]$mapdiskstoallesxhosts,[string]$mountdriveperimage,[string]$mountpointperimage,[switch][alias("g")]$guided,[switch][alias("m")]$monitor,[switch][alias("w")]$wait) { <# .SYNOPSIS Mounts a file system image .EXAMPLE New-AGMLibFSMount Runs a guided menu to mount an image of a file system to a host .EXAMPLE New-AGMLibFSMount -targethostid 655169 -imageid 6458934 Mounts imageid 6458934 to targethost id 655169 .EXAMPLE New-AGMLibFSMount -appid 925267 -targethostid 655169 -volumes "E:\" -mountapplianceid 1415071155 -mountdriveperimage "r:\" Mounts the latest image for appid 925267 on appliance 1415071155 to target host id 655169, mounting only the E:\ volume as the r:\ .EXAMPLE New-AGMLibFSMount -targethostid 655169 -imageid 6458934 -volumes "D:\,E:\" -volumemappings "dasvol:D:\,mountpoint,d:\avtest1;dasvol:E:\,mountpoint,d:\avtest2" Mount the specified image to the specified host using specified moint points. Note that to get the dasvol namings you will need to check the restorableobjects portion of the image .DESCRIPTION A function to mount file system images to an existing host * Image selection can be done three ways: 1) Run this command in guided mode to learn the available images and select one 2) Learn the imagename and specify that as part of the command with -imagename 3) Learn the Appid and Cluster ID for the appliance that will mount the image and then use -appid and -mountapplianceid This will use the latest snapshot, dedupasync, StreamSnap or OnVault image on that appliance #> if ( (!($AGMSESSIONID)) -or (!($AGMIP)) ) { Get-AGMErrorMessage -messagetoprint "Not logged in or session expired. Please login using Connect-AGM" return } else { $sessiontest = (Get-AGMSession).session_id if ($sessiontest -ne $AGMSESSIONID) { Get-AGMErrorMessage -messagetoprint "Not logged in or session expired. Please login using Connect-AGM" return } } # if the user gave an AppID lets check it and grab an image, need to expand outside snapshots if (($appid) -and ($mountapplianceid) -and (!($imageid))) { # if we are not running guided mode but we have an appid without imageid, then lets get the latest image on the mountappliance ID $imagegrab = Get-AGMImage -filtervalue "appid=$appid&targetuds=$mountapplianceid&jobclass=snapshot&jobclass=StreamSnap&jobclass=dedupasync&jobclass=OnVault" -sort "consistencydate:desc,jobclasscode:asc" -limit 1 if ($imagegrab.count -eq 1) { $imageid = $imagegrab.id $imagename = $imagegrab.backupname } else { Get-AGMErrorMessage -messagetoprint "Failed to fetch a snapshot, dedupasync, StreamSnap or OnVault Image for appid $appid on appliance with clusterID $mountapplianceid" return } } if (($appname) -and (!($appid)) ) { $appgrab = Get-AGMApplication -filtervalue appname=$appname if ($appgrab.id.count -ne 1) { Get-AGMErrorMessage -messagetoprint "Failed to resolve $appname to a single App ID. Use Get-AGMLibApplicationID and try again specifying -appid." return } else { $appid = $appgrab.id } } # learn about the image if ($imagename) { $imagecheck = Get-AGMImage -filtervalue backupname=$imagename if (!($imagecheck)) { Get-AGMErrorMessage -messagetoprint "Failed to find $imagename using: Get-AGMImage -filtervalue backupname=$imagename" return } else { $imagegrab = Get-AGMImage -id $imagecheck.id $imageid = $imagegrab.id $appname = $imagegrab.appname $appid = $imagegrab.application.id } } # if the user gave us nothing to start work, then ask for a VMware VM name if ( (!($appname)) -and (!($imagename)) -and (!($imageid)) -and (!($appid)) ) { $guided = $true Clear-Host Write-host "File System source selection menu" Write-host "" $appgrab = Get-AGMApplication -filtervalue "apptype=FileSystem&apptype=SystemState&apptype=ConsistGrp&managed=True" | sort-object apptype,appname if ($appgrab.count -eq 0) { Get-AGMErrorMessage -messagetoprint "There are no File System, System State or Consistency Group apps to list" return } if ($appgrab.count -eq 1) { $appname = $appgrab.appname $appid = $appgrab.id write-host "Found one $($appgrab.apptype) app $appname on $($appgrab.cluster.name)" write-host "" } else { $i = 1 foreach ($app in $appgrab) { $app | Add-Member -NotePropertyName select -NotePropertyValue $i $app | Add-Member -NotePropertyName appliancename -NotePropertyValue $app.cluster.name $app | Add-Member -NotePropertyName hostname -NotePropertyValue $app.host.name $i++ } Clear-Host write-host "Select an application" Write-host "" $appgrab | select-object select,apptype,hostname,appname,id,appliancename | Format-table * While ($true) { Write-host "" $listmax = $appgrab.id.count [int]$userselection = Read-Host "Please select an app to work with (1-$listmax)" if ($userselection -lt 1 -or $userselection -gt $listmax) { Write-Host -Object "Invalid selection. Please enter a number in range [1-$($listmax)]" } else { break } } $appid = $appgrab.id[($userselection - 1)] $appname = $appgrab.appname[($userselection - 1)] } #image selection time Clear-Host $imagelist = Get-AGMImage -filtervalue "appid=$appid&jobclass=snapshot&jobclass=StreamSnap&jobclass=OnVault&jobclass=dedupasync" | Sort-Object consistencydate,jobclasscode | select-object -Property backupname,consistencydate,id,jobclass,cluster,transport if ($imagelist.backupname.count -eq 0) { Get-AGMErrorMessage -messagetoprint "Failed to fetch any snapshot, streamsnap, onvault or dedupasync Images for appid $appid" return } if ($imagelist.backupname.count -eq 1) { $imagegrab = Get-AGMImage -id ($imagelist).id $imagename = $imagegrab.backupname $restorableobjects = $imagegrab.restorableobjects } else { Clear-Host Write-Host "Image list. Choose the best consistency date and jobclass." $i = 1 foreach ($image in $imagelist) { $image | Add-Member -NotePropertyName select -NotePropertyValue $i $image | Add-Member -NotePropertyName appliancename -NotePropertyValue $image.cluster.name $i++ } $imagelist | select-object select,consistencydate,jobclass,appliancename,backupname,id,transport | Format-table * While ($true) { Write-host "" $listmax = $imagelist.Length [int]$imageselection = Read-Host "Please select an image (1-$listmax)" if ($imageselection -lt 1 -or $imageselection -gt $imagelist.Length) { Write-Host -Object "Invalid selection. Please enter a number in range [1-$($imagelist.Length)]" } else { break } } $imageid = $imagelist[($imageselection - 1)].id $imagegrab = Get-AGMImage -id $imageid $imagename = $imagegrab.backupname $restorableobjects = $imagegrab.restorableobjects $mountapplianceid = $imagegrab.cluster.clusterid $mountappliancename = $imagegrab.cluster.name } } if ( ($targethostname) -and (!($targethostid)) ) { $hostcheck = Get-AGMHost -filtervalue hostname=$targethostname if ($hostcheck.id.count -ne 1) { Get-AGMErrorMessage -messagetoprint "Failed to resolve $targethostname to a single host ID. Use Get-AGMLibHostID and try again specifying -targethostid" return } else { $hostgrab = Get-AGMHost -id $hostcheck.id $targethostid = $hostgrab.id $vmtype = $hostgrab.vmtype $transport = $hostgrab.transport $diskpref = $hostgrab.diskpref $vcenterid = $hostgrab.vcenterhost.id #if the VM doesn't have a transport, then the vCenter must have one if ( ($vmtype -eq "vmware") -and (!($transport)) ) { $vcgrab = Get-AGMHost -filtervalue id=$vcenterid $transport = $vcgrab.transport } } } # if we got a target ID lets check it if ( ($targethostid) -and (!($targethostname)) ) { $hostgrab = Get-AGMHost -filtervalue id=$targethostid if ($hostgrab.id.count -eq -0) { Get-AGMErrorMessage -messagetoprint "Failed to resolve $targethostid to a single host ID. Use Get-AGMLibHostID and try again specifying -targethostid" return } $targethostname=$hostgrab.hostname $vmtype = $hostgrab.vmtype $transport = $hostgrab.transport $diskpref = $hostgrab.diskpref $vcenterid = $hostgrab.vcenterhost.id if ( ($vmtype -eq "vmware") -and (!($transport)) ) { $vcgrab = Get-AGMHost -filtervalue id=$vcenterid $transport = $vcgrab.transport } } # Guided menu for target selection and moint points and restore points and VMware options if ($guided) { if (!($label)) { Clear-Host [string]$label = Read-host "Label" } # mountedhost menu if (!($targethostid)) { $hostgrab = Get-AGMHost -filtervalue "clusterid=$mountapplianceid&hosttype!VMCluster&hosttype!esxhost&hosttype!NetApp 7 Mode&hosttype!NetApp SVM&hosttype!ProxyNASBackupHost&hosttype!Isilon" | sort-object vmtype,hostname if ($hostgrab.id.count -eq -0) { Get-AGMErrorMessage -messagetoprint "Failed to find any hosts on $mountappliancename" return } if ($hostgrab.id.count -eq 1) { $targethostid = $hostgrab.id $targethostname = $hostgrab.hostname } else { Clear-Host Write-Host "Host List." $i = 1 foreach ($hostid in $hostgrab) { $hostid | Add-Member -NotePropertyName select -NotePropertyValue $i if (!($hostid.vmtype)) { $hostid | Add-Member -NotePropertyName vmtype -NotePropertyValue "Physical" } $i++ } $hostgrab | select-object select,vmtype,hostname,ostype,id | Format-table * While ($true) { Write-host "" $listmax = $hostgrab.count [int]$userselection = Read-Host "Please select a host (1-$listmax)" if ($userselection -lt 1 -or $userselection -gt $hostgrab.Length) { Write-Host -Object "Invalid selection. Please enter a number in range [1-$($hostgrab.count)]" } else { break } } $targethostid = $hostgrab.id[($userselection - 1)] $targethostname = $hostgrab.hostname[($userselection - 1)] $vmtype = $hostgrab.vmtype[($userselection - 1)] $transport = $hostgrab.transport[($userselection - 1)] $diskpref = $hostgrab.diskpref[($userselection - 1)] $vcenterid = $hostgrab.vcenterhostid[($userselection - 1)] if ( ($vmtype -eq "vmware") -and (!($transport)) ) { $vcgrab = Get-AGMHost -filtervalue id=$vcenterid $transport = $vcgrab.transport } } } # if this is a VMTarget if ($vmtype -eq "vmware") { if (($diskpref -eq "BLOCK") -and ($transport -ne "GUESTVMISCSI")) { Clear-Host Write-Host "Mount mode" if ($transport -eq "NFS") { $defaultmode = 3 Write-Host "1`: vrdm" Write-Host "2`: prdm" Write-Host "3`: nfs(default)" } else { $defaultmode = 1 Write-Host "1`: vrdm(default)" Write-Host "2`: prdm" Write-Host "3`: nfs" } Write-Host "" [int]$userselection = Read-Host "Please select from this list (1-3)" if ($userselection -eq "") { $userselection = $defaultmode } if ($userselection -eq 1) { $mountmode = "vrdm" } if ($userselection -eq 2) { $mountmode = "prdm" } if ($userselection -eq 3) { $mountmode = "nfs" } # map to all ESX host Clear-Host Write-Host "Map to all ESX Hosts" Write-Host "1`: Do not map to all ESX Hosts(default)" Write-Host "2`: Map to all ESX Hosts" Write-Host "" [int]$userselection = Read-Host "Please select from this list (1-2)" if ($userselection -eq "") { $userselection = 1 } if ($userselection -eq 1) { $mapdiskstoallesxhosts = "false" } if ($userselection -eq 2) { $mapdiskstoallesxhosts = "true" } } } # see if user wants mount drive or point per image Clear-Host $mountdriveperimage = "" $mountdriveperimage = Read-Host "Mount Drive for the image (Windows only, optional)" if ($mountdriveperimage -eq "") { $mountpointperimage = "" $mountpointperimage = Read-Host "Mount Point for the image (optional)" } # now see if user wants mount points or drives per volume $vollist = $restorableobjects | select-object name | sort-object name if ($vollist.count -gt 1) { Clear-Host Write-Host "Volume list (either enter 0 or a comma separated list e.g. 1,2)" Write-Host "0`: All volumes (default)" $i = 1 foreach ($volume in $vollist.name) { Write-Host -Object "$i`: $volume" $i++ } [string]$userselection = Read-Host "Please select from this list (0 or comma separated list)" $uservolumelist = "" if (($userselection -eq "0") -or ($userselection -eq "")) { $selectedobjects = @( foreach ($volume in $vollist.name) { [pscustomobject]@{restorableobject=$volume} } ) foreach ($volume in $vollist.name) { $uservolumelist = $uservolumelist + "," + $volume } $uservolumelistfinal = $uservolumelist.substring(1) } else { $selectedobjects = @( foreach ($selection in $userselection.Split(",")) { [pscustomobject]@{restorableobject=$vollist.name[($selection - 1)]} } ) foreach ($selection in $userselection.Split(",")) { $uservolumelist = $uservolumelist + "," + $vollist.name[($selection - 1)] } $uservolumelistfinal = $uservolumelist.substring(1) } # if the user asked for per image mount then dont start otherwise ask per drive if ( (!($mountdriveperimage)) -and (!($mountpointperimage)) ) { $volumemappings = "" write-host "" write-host "Volume mounts (optional)" foreach ($object in $uservolumelistfinal.Split(",")) { $uniqueid = ($restorableobjects | where-object {$_.name -eq $object } | select-object volumeinfo).volumeinfo.uniqueid $mountdriveperobject = "" $mountpointperobject = "" $mountdriveperobject = Read-Host "Mount Drive for $object (Windows only, optional)" if ($mountdriveperobject -eq "") { $mountpointperobject = "" $mountpointperobject = Read-Host "Mount Point for $object (optional)" } if ($mountdriveperobject -ne "") { $volumemappings += ";" + "$uniqueid" + "," + "mountdrive" + "," + $mountdriveperobject } if ($mountpointperobject -ne "") { $volumemappings += ";" + "$uniqueid" + "," + "mountpoint" + "," + $mountpointperobject } } if ($volumemappings -ne "") { $volumemappings=$volumemappings.substring(1) } } } Clear-Host Write-Host "Guided selection is complete. The values entered would result in the following command:" Write-Host "" Write-Host -nonewline "New-AGMLibFSMount -appid $appid -targethostid $targethostid -imageid $imageid" if ($uservolumelistfinal) { Write-Host -nonewline " -volumes `"$uservolumelistfinal`"" } if ($mountapplianceid) { Write-Host -nonewline " -mountapplianceid $mountapplianceid" } if ($volumemappings) { Write-Host -nonewline " -volumemappings `"$volumemappings`"" } if ($mountmode) { Write-Host -nonewline " -mountmode $mountmode -mapdiskstoallesxhosts $mapdiskstoallesxhosts" } if ($mountdriveperimage) { Write-Host -nonewline " -mountdriveperimage `"$mountdriveperimage`"" } if ($mountpointperimage) { Write-Host -nonewline " -mountpointperimage `"$mountpointperimage`"" } Write-Host "" Write-Host "1`: Run the command now (default)" Write-Host "2`: Show the JSON used to run this command, but don't run it" Write-Host "3`: Exit without running the command" $userchoice = Read-Host "Please select from this list (1-3)" if ($userchoice -eq 2) { $jsonprint = "yes" } if ($userchoice -eq 3) { return } } # if user asked for volumes if ($volumes) { $selectedobjects = @( foreach ($volume in $volumes.Split(",")) { [pscustomobject]@{restorableobject=$volume} } ) } if ($volumemappings) { $volumemappingsobject= @() foreach ($object in $volumemappings.Split(";")) { foreach ($part in $object) { $volumemappingsobject += [ordered]@{ restoreobject = $part.Split(",")[0] $part.Split(",")[1] = $part.Split(",")[2] } } } } if (!($imageid)) { [string]$imageid = Read-Host "ImageID to mount" } if (!($imagename)) { $imagename = (Get-AGMImage -id $imageid).backupname } if (!($mountmode)) { $physicalrdm = 0 $rdmmode = "independentvirtual" } else { if ($mountmode -eq "vrdm") { $physicalrdm = 0 $rdmmode = "independentvirtual" } if ($mountmode -eq "prdm") { $physicalrdm = 1 $rdmmode = "physical" } if ($mountmode -eq "nfs") { $physicalrdm = 2 $rdmmode = "nfs" } } if ($mapdiskstoallesxhosts) { if (($mapdiskstoallesxhosts -ne "true") -and ($mapdiskstoallesxhosts -ne "false")) { Get-AGMErrorMessage -messagetoprint "The value of Map to all ESX hosts of $mapdiskstoallesxhosts is not valid. Must be true or false" return } $restoreoptions = @( @{ name = 'mapdiskstoallesxhosts' value = "$mapdiskstoallesxhosts" } ) } if ($mountpointperimage) { if ($restoreoptions) { $imagemountpoint = @{ name = 'mountpointperimage' value = "$mountpointperimage" } $restoreoptions = $restoreoptions + $imagemountpoint } else { $restoreoptions = @( @{ name = 'mountpointperimage' value = "$mountpointperimage" } ) } } if ($mountdriveperimage) { if ($restoreoptions) { $imagemountpoint = @{ name = 'mountdriveperimage' value = "$mountdriveperimage" } $restoreoptions = $restoreoptions + $imagemountpoint } else { $restoreoptions = @( @{ name = 'mountdriveperimage' value = "$mountdriveperimage" } ) } } if (!($label)) { $label = "" } $body = [ordered]@{ label = $label; image = $imagename; host = @{id=$targethostid} migratevm = "false"; } if ($restoreoptions) { $body = $body + [ordered]@{ restoreoptions = $restoreoptions } } if ($selectedobjects) { $body = $body + [ordered]@{ selectedobjects = $selectedobjects } } if ($restoreobjectmappings) { $body = $body + [ordered]@{ restoreobjectmappings = $restoreobjectmappings } } if ($mountmode) { $body = $body + @{ physicalrdm = $physicalrdm } $body = $body + @{ rdmmode = $rdmmode } } if ($volumemappingsobject) { $body = $body + @{ restoreobjectmappings = $volumemappingsobject } } $json = $body | ConvertTo-Json if ($monitor) { $wait = $true } if ($jsonprint -eq "yes") { $compressedjson = $body | ConvertTo-Json -compress Write-host "This is the final command:" Write-host "" Write-host "Post-AGMAPIData -endpoint /backup/$imageid/mount -body `'$compressedjson`'" return } Post-AGMAPIData -endpoint /backup/$imageid/mount -body $json if ($wait) { Start-Sleep -s 15 $jobgrab = Get-AGMJob -filtervalue "appid=$appid&jobclasscode=5&isscheduled=false&targethost=$targethostname" -sort queuedate:desc -limit 1 if (!($jobgrab.jobname)) { Start-Sleep -s 15 $jobgrab = Get-AGMJob -filtervalue "appid=$appid&jobclasscode=5&isscheduled=false&targethost=$targethostname" -sort queuedate:desc -limit 1 if (!($jobgrab.jobname)) { return } } else { $jobgrab| select-object jobname,status,queuedate,startdate,targethost } if (($jobgrab.jobname) -and ($monitor)) { Get-AGMLibFollowJobStatus $jobgrab.jobname } } } |